 Another rear main seal question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| rjames |
 Sep 14 2014, 01:52 AM
Post
#1
|
|
I'm made of metal  Group: Members Posts: 4,158 Joined: 24-July 05 From: Shoreline, WA Member No.: 4,467 Region Association: Pacific Northwest 
 |
After reading countless threads for the correct way to install the rear main seal I've found contradicting info and need some guidance.
Question #1: There seems to be a consensus that only engine oil should be used on the seal. Makes sense. but I've read posts from Jake where he has said to oil both the inner and outer surfaces and another post where he states NOT to oil the outer diameter of the seal. I of course found the latter info after I oiled the OD of the seal to aid in the install. Should I not have oiled the outer diameter if the seal? #2: I was able to seat the seal recessed. in about 1-2mm of the case before I couldn't get it to go in farther. I don't think it's all the way back against the back if the bore though. Is it in far enough? |
   |
 
|
Posts in this topic
rjames Anyone? Sep 15 2014, 04:30 PM Philip W. i am by no means an expert here but, i just did th... Sep 16 2014, 07:32 AM dknechtly I put mine in dry (no oil, no sealant) and put it ... Sep 16 2014, 07:45 AM
rjames Thanks for the replies.
Phil- I did check the en... Sep 16 2014, 11:54 AM Philip W.
Thanks for the replies.
Phil- I did check the e... Sep 16 2014, 12:08 PM  |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 09:20 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.