1975 2.0, Engine rebuild Options

[DavidSweden]

I am going to rebuild my 2.0 GC engine. The car was originally fitted with the smog stuff removed by PO, also has the original FI

Question;

I want to get more power from the engine without spending a lot of $ and I want to do the work myself.
All suggestions welcome, thanks

[Bob L.]

Swap out the 94mm cylinders and pistons for 96mm. That will give you a 2056mm displacement engine.Then you either re-tune the MPS and keep the D-jet or go with carbs and a cam swap. It's a pretty popular "upgrade". Just check the new P's&C's for run out. Some brands can be hit or miss.

[kkid]

Swap out the 94mm cylinders and pistons for 96mm. That will give you a 2056mm displacement engine.Then you either re-tune the MPS and keep the D-jet or go with carbs and a cam swap. It's a pretty popular "upgrade". Just check the new P's&C's for run out. Some brands can be hit or miss.

I don't mean to hijack here but.... would you be more specific about "Just check the new P's&C's for run out. Some brands can be hit or miss."?

Thanks,

kkid )