 Can't Open Case? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| VWTortuga336 |
 Jan 11 2015, 11:34 AM
Post
#1
|
|
Member  Group: Members Posts: 285 Joined: 5-October 14 From: Kansas City, Missouri Member No.: 17,979 Region Association: None  |
I'm working on splitting the case on my GC code engine. I've taken out all the case nuts and bolts (and double checked, triple checked, then checked two more times for good measure) but I can't open the case fully (IMG:style_emoticons/default/WTF.gif)
3 of the 4 "corners" of the case open very freely, but the one pictured will only rock back and forth, it will not open all the way to separate the case halves. I know this may be a difficult one to answer via a forum post, but anyone have any suggestions as to what I may be missing? Any and all suggestions would be greatly appreciated, I am at my wits end on this one!! Attached thumbnail(s) 
|
   |
 
|
  |
Replies
| VWTortuga336 |
Jan 13 2015, 09:40 PM
Post
#2
|
|
Member Group: Members Posts: 285 Joined: 5-October 14 From: Kansas City, Missouri Member No.: 17,979 Region Association: None |
I finally got the case split tonight. I had to remove the stud I suspected was bent and the case opened up with no further issues (IMG:style_emoticons/default/piratenanner.gif)
But, the stud wasn't bent, it had something on it that prevented it from going through the hole in the case half. Anyone have any guesses at to what it could be. It's sort of copper in color and is stuck to the stud big time. It goes about 75% around the stud (IMG:style_emoticons/default/WTF.gif) Attached thumbnail(s) 
|
|
|
|
Posts in this topic
VWTortuga336 Can't Open Case? Jan 11 2015, 11:34 AM
r_towle Is that a picture of the case?
If it is, you may ... Jan 11 2015, 11:36 AM VWTortuga336 Yes, this is my case. I'll give that a shot.
... Jan 11 2015, 11:49 AM
SirAndy Can you think of any other reason why this would h... Jan 11 2015, 12:51 PM VWTortuga336
Can you think of any other reason why this would ... Jan 11 2015, 01:07 PM walterolin Do you have the six thru bolts out? They have a v... Jan 11 2015, 01:25 PM VWTortuga336
Do you have the six thru bolts out? They have a ... Jan 11 2015, 01:34 PM stugray Tap all of the case thru bolts out before trying t... Jan 11 2015, 01:46 PM r_towle If you made it that far with all the through bolts... Jan 11 2015, 02:07 PM RobW I had the same issue, remove the bolts but take t... Jan 12 2015, 08:27 AM VWTortuga336
I had the same issue, remove the bolts but take ... Jan 12 2015, 08:52 AM stugray You can drive the bolts all the way out before try... Jan 12 2015, 09:57 AM r_towle take a smaller bolt and drive out the through bolt... Jan 12 2015, 12:23 PM r_towle RTV copper form a gasket maybe. Jan 13 2015, 09:44 PM veekry9 copper wire,14-12 ga. Jan 14 2015, 12:15 AM VWTortuga336 I'm still wondering WHY this would be on the s... Jan 17 2015, 10:46 AM injunmort i have seen people use strands of copper wire as a... Jan 17 2015, 10:50 AM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 22nd December 2024 - 11:17 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.