914 Engine Choices, Will buy 914, if I can build a monster Options

[GreekDriver]

Hello. I'm a BMW fan, sorry guys. But the 914 has to be one of the funnest cars I've ever driven! Other than its transmission feeling like shifting through oatmeal and damn near impossible to get a smoot shift out of... (IMG:style_emoticons/default/mad.gif) (This is on all 914s I've driven, even one with a rebuilt transmission)

Well, there's a nice 914 for sale, with minimal rust, original motor, great interior and paint, and low miles. It's a 76 2.0l I believe, in Black. A fella in the neighborhood has had it since 1979 and barely driven it. He's not a car guy, he bought it because it looked nice. It drives nicely, but it lacks power, and the brakes don't impress me.

It's going to need an engine and rebuilding the type iv to its horrible stock form would just piss me off. Alot. I've been looking at engine options and I have no clue on what to do. I want lightweight, EXTREMELY high revving, past 10k RPMs, and over 190hp. So the V8s are out of the question. I've thought about a 2.0l Carrea motor, as those should be able to rev like hell when built. But I haven't really seen much info on them anywhere. Another Idea I had was an S14 engine from the E30 M3(1988 BMW M3), but I have no clue what transmission I'd use and how I'd get it to work... My last idea was to build an M10 up. The M10 was THE I-4 out of the BMW 2002s, E21s, and some E30s. It loves boost, the 1.5l block was doing 1500hp for BMW F1 in the 80s. (IMG:style_emoticons/default/biggrin.gif) I would try to find a way to get it to rev high in N/A form, or boost it. But again, I don't know how I'd get it to work with the 914.

Anyways, just give me some general ideas guys. I'd worry about suspension and brakes later. Oh, and the damn transmission would be going to the yard and I'm going to request to see it crunched, it would make me feel so good.

Thanks! And it's nice to be here! Hopefully I'll get some interesting responses to push me to buy that car.

[seanery]

As far as brakes go, just make sure the current system is clean and solid and it should stop very well. Get good pads and it's great.

I doubt you'll find any 10k rpm motor for our cars, short of a rotary. You don't need tons of rpms to get a great sound. Listen to any smaller six and it sings!

Remove the smog from the 76 and put a new cam with some bigger jugs and carbs and you'll get a nice, healthy powerplant that may spin to 7k safely.

And shifting a 914 is an artform. It takes finese. It's not like an E30 or E36 at all. Drive a well sorted car before you start your project and it will help guide you to a fun place. (IMG:style_emoticons/default/driving.gif)