The joy was short lived...got it working, Oil pressure = 60 but have leak |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
The joy was short lived...got it working, Oil pressure = 60 but have leak |
DavidSweden |
Apr 26 2015, 11:03 AM
Post
#1
|
Member Group: Members Posts: 479 Joined: 8-June 14 From: Sweden Member No.: 17,452 Region Association: Scandinavia |
Well as the title says is all gone tits up.
I started my rebuilt engine yesterday and broke in the cam, today was supposed to be the first drive. I decided to check the actual oil pressure so I pulled the pressure switch and connected my gauge. There was no pressure even at 2k rpm. The pump is working but there is no pressure. Obviously the oil must be going somewhere, if the high pressure relief plunger is stuck open would this explain what's happening? Appreciate some help |
stugray |
May 1 2015, 03:24 PM
Post
#2
|
Advanced Member Group: Members Posts: 3,825 Joined: 17-September 09 From: Longmont, CO Member No.: 10,819 Region Association: None |
I thought you's get the hint from the (IMG:style_emoticons/default/shades.gif)
What I believe happened (but hope not) is that the pressure relief piston froze during your 20 minute cam breakin period (at the 1 minute point or the 19 minute point? (IMG:style_emoticons/default/confused24.gif) ) Then the bearings took the brunt of the abuse and are already toast. This would look just like a very old tired motor with respect to oil pressure. As the bearings wear, the clearances open up reducing overall system oil pressure. I just moved the "Racer Chris oil pressure relief valve upgrade" up on my list of next things to buy. http://www.914world.com/bbs2/index.php?showtopic=236704 |
DavidSweden |
May 1 2015, 03:51 PM
Post
#3
|
Member Group: Members Posts: 479 Joined: 8-June 14 From: Sweden Member No.: 17,452 Region Association: Scandinavia |
I thought you's get the hint from the (IMG:style_emoticons/default/shades.gif) What I believe happened (but hope not) is that the pressure relief piston froze during your 20 minute cam breakin period (at the 1 minute point or the 19 minute point? (IMG:style_emoticons/default/confused24.gif) ) Then the bearings took the brunt of the abuse and are already toast. This would look just like a very old tired motor with respect to oil pressure. As the bearings wear, the clearances open up reducing overall system oil pressure. I just moved the "Racer Chris oil pressure relief valve upgrade" up on my list of next things to buy. http://www.914world.com/bbs2/index.php?showtopic=236704 Stugray, You may be right and the bearings are toast, at the moment its just too painful to consider. As I did have oil pressure (the idiot light was off) during breakin I am hoping there ok. as you will understand, before I drop and tear into the engine I must see if the lack of oil pressure is due to something else....you never know I may get lucky |
Lo-Fi Version | Time is now: 26th September 2024 - 05:26 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |