2056 microsquirt, Its alive! Now I have to tune it |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
2056 microsquirt, Its alive! Now I have to tune it |
peteyd |
May 28 2015, 08:10 PM
Post
#1
|
Senior Member Group: Members Posts: 726 Joined: 27-March 08 From: Elora, Ontario, Canada Member No.: 8,858 Region Association: Canada |
I had my car on the road for only two summers until I wanted to get a more reliable engine. I was not too familiar with the microsquirt, or megasquirt system, but when Mark started to offer a kit I knew that it would be a great starting point. I also had followed the progress of McMarks, rwilner and Zachs conversions and figured they had done enough trail blazing that it would be a piece of cake.
I started to piece together my own little manuel of pictures and notes from other threads and came up with my own little DIY powerpoint. So hopefully this thread can benefit others and hopefully these guys dont mind that I am reposting some of their photos. I didnt just decide to buy the system on a whim though. It all started one night when I was driving home on the highway and I heard a pretty large bang. I had just replaced my oil pressure relief valve with the new tangerine product and thought my engine had just exploded! I pulled over and realized after digging around that my #3 spark plug blew out of the threads. I have a head temp sensor under the plug, so Im thinking that it wasnt turned in all the way and the pressure was too great for the threads to hold the plug. BTW the pressure relief valve is a great product That winter I pulled the engine and then the head and put a time-sert in #3 After bolting the heads back up, I noticed that my valve train geometry was off. So at that point I decided to measure and cut custom pushrods for the proper geometry. https://www.youtube.com/watch?v=aE-TJxlE7Ck And since I had the engine out, and Chris had just come out with another great engine product, I figured what the Hell, and bought his SS pushrod tubes and installed them. At this point I had been thinking about McMarks EFI kit seriously, and decided to pull the trigger. I ordered the kit from Mark @ Original Customs. I patiently waited and my kit finally came! Im using the stock 2L plenums and throttle body. Here is what came in the kit. (photos from Zach) I got the same stuff. |
peteyd |
Jun 17 2015, 06:07 AM
Post
#2
|
Senior Member Group: Members Posts: 726 Joined: 27-March 08 From: Elora, Ontario, Canada Member No.: 8,858 Region Association: Canada |
Just heard my old 2432 Raby Kit motor that Mark and I built running on MegaSquirt this evening. It is so much better than SDS! I couldn't believe how smooth and powerful! (IMG:style_emoticons/default/biggrin.gif) This should be a fun driver when you're done Pete! Rob, thats encouraging! Im sure it will be a huge difference from my last setup, 36 dells. Just a thought, whats the pressure rating on that plastic fuel filter? (or is it on the suction side of the pump) Mats, That is something I should probably look into. It was the same one that I used for my carb setup. I should change it just to be safe. thanks |
Lo-Fi Version | Time is now: 20th September 2024 - 04:54 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |