 Front Caliper clearance question 3.5" spacing 5 Lug, Wilwood Superlite's |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Vysoc |
 Jul 12 2015, 12:28 PM
Post
#1
|
|
Vysoc  Group: Members Posts: 588 Joined: 27-August 09 From: Young Harris, Georgia Member No.: 10,737 Region Association: South East States  |
Hello World,
I am reworking my front 5 lug struts,shocks and calipers. I was able to pick-up a set of Wilwood Superlite 3.5" spacing front calipers with 3 sets of additional brake pads. Upon doing a dry run on fit, I needed to trim my brake dust covers slightly but I noticed that the caliper did not line up in the center of the rotor. Rotors are new Sebro 405 43001 098. Is it possible to use washers to adjust the caliper position to center. I would obviously purchase longer bolts to make sure that the same amount of thread is holding in the strut. The adjustment distance would be approximately 5mm. Thanks, Vysoc (IMG:style_emoticons/default/flag.gif) |
   |
 
|
  |
Replies
| Maltese Falcon |
Jul 13 2015, 08:26 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 4,818 Joined: 14-September 04 From: Mulholland SoCal Member No.: 2,755 Region Association: None  |
...just found the superlite 6 puck @ 3.5" spacing on the Wilwood site (IMG:style_emoticons/default/smile.gif)
|
 |
|
Posts in this topic
Vysoc Front Caliper clearance question 3.5" spacing 5 Lug Jul 12 2015, 12:28 PM
Mueller I've done that before and never had an issue, ... Jul 12 2015, 12:44 PM 914forme :ttiwwp:
Did not know Wilwood made a superlite i... Jul 12 2015, 12:50 PM Vysoc Yes Wilwood did make a 3.5" spaced Front Cali... Jul 12 2015, 12:56 PM Andyrew I wouldnt hesitate to use quality washers to space... Jul 12 2015, 01:02 PM Vysoc As promised pictures of the Wilwood Superlite 3.5... Jul 13 2015, 07:31 PM Maltese Falcon ...wonder if these are made in 6 piston as well ? ... Jul 13 2015, 07:43 PM Mike Bellis Your bleeder screws are on the bottom. Just a mock... Jul 13 2015, 08:42 PM Vysoc Correct this is on the wrong strut, I noticed that... Jul 14 2015, 06:10 AM Elliot Cannon I used thick washers. Jul 14 2015, 08:59 AM 914forme Oh so nice, Marty P/N for the 6 pucks, and what ro... Jul 14 2015, 09:21 AM
Elliot Cannon
Oh so nice, Marty P/N for the 6 pucks, and what r... Jul 14 2015, 09:33 AM 914forme
You ever see a freight train try to stop quickly... Jul 14 2015, 08:36 PM matthepcat Looks like the "Billet Narrow Superlite 6 Lug... Jul 14 2015, 09:42 AM Mike Bellis Looks like I need some to replace my 930 calipers.... Jul 14 2015, 07:12 PM matthepcat
Looks like I need some to replace my 930 calipers... Jul 15 2015, 09:39 AM Mueller I have to ask...what the heck is that scoring card... Jul 15 2015, 10:07 AM Vysoc I took this off the same memory card in my Nikon a... Jul 15 2015, 02:03 PM wndsrfr OK, Here's my Wilwood conversion & I love ... Jul 15 2015, 08:02 PM Andyrew
OK, Here's my Wilwood conversion & I love... Jul 15 2015, 11:09 PM 914forme I will now agree with Mike, started as a small ide... Jul 16 2015, 04:25 AM wndsrfr I made the caliper adapters by old school measurin... Jul 16 2015, 05:58 AM Vysoc Wndsrfr,
Beautiful set-up those Wilwood's loo... Jul 16 2015, 07:15 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th September 2024 - 05:47 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.