console and dash face rebuild, INSTALLED!!, pix pix pix pix Options

[SirAndy]

so, last week i decided it was time to tackle my ugly ripped console and dash face. i got everything out, took off the old vinyl and cleaned it all up.
went and got myself some black and red vinyl and contact cement.

3 days later:

[lapuwali]

Trekkor, thou should not cast stones. By most measures, Napa is part of the SF Bay Area. As the crow flies, Napa is closer to SF than San Jose.

What no one has bothered to comment on is the fact that this was obviously done inside Andy's house, and there are clearly a set of mounted gravel-covered slicks in his living room. When I was w/o a garage, at least I stored my AX tires in the back hallway. (IMG:style_emoticons/default/biggrin.gif)

Great work on the dash bits. I've been avoiding a center console, as I rather like the open center section, but I'm reconsidering with such a nice job done. That roll cage also looks much easier to live with day to day than many I've seen. In particular, I like the forward position of the downtube near the A-pillar. Most are back farther (to clear the dash, rather than go through it), but that makes getting out a lot harder, esp. for those of us with older, stiffer bodies.