Rebuilt Pedal sets 914, 911, 912 $300, Powder coated, Bronze bushings, zinc plated Options

[bdstone914]

Rebuilding a pedal set can be a frustrating and time consuming project for the first timer. I have been building pedal sets for over 10 years with many satisfied customers.

I offer rebuilt pedal sets for 914, 911, and 912 Porsche's on an outright or exchange basis. Price is $300 $300

The pedal sets are chemically stripped or media blasted clean. The small parts are zinc plated to prevent internal and external rust. The large parts are powder coated satin black. Bronze bushings are used to replace all bushings. New clutch springs are used if needed or brake springs are replated if in good condition or replaced with new springs.
New rubber stoppers are used.

Flat shipping of $20 in the U.S. Will ship worldwide at cost. I typically have in stock parts to build most Porsche pedal sets for 911's up to 1987 and all 914's. This is the same service that is listed on Pelican's web site. Emergency next day shipping is available.
Feel free to contact me with any questions.

bdstone914 ( screen name)
cell phone 951 536 7478
bdstone914@aol.com

Bruce Stone

[Amphicar770]

Just received my pedal set. Beautiful work, looks like new. Can't wait to install it. Just waiting for the new clutch cable to come in. If I have to pull out the center console (PIA with A/C unit), I figure I will take care of everything in there at once.

BTW, my pedal area is pretty clean but in looking at some of the pics, that is not always the case. APS paint can provide you a spray can of 2K, epoxy based paint mixed to factory color. You just hit a trigger button at bottom of can to activate the chemicals. Gives you the durability of a two part coating without needing a paint gun (good for the hell hole area also). No connection, just passing along info based on experience.