BUILD-OFF CHALLENGE: Vysoc / Yellow Sub, And so it begins............ Options

[Vysoc]

Here we go,
I bought this chassis several years ago and have been cutting out sections with rust. This roller was a 1976 with Fiberglas Flares, I like them. There is much work to be done.
My 5 Major Project Points are:
1) Repair & Replace all rusted areas and weld in;
* - New Floor Pans.
*- Repairs to the Hell Hole area.
*- Engman Kit.
*- Weltmeister Chassis Stiffening Kit.
*- McMark's Roll Bar.
2) Install Patrick Six Engine Mount, Install Engine, Have Transmission Rebuilt, Install
Patrick Oil Tank and all Lines necessary, Install Oil Cooler, Rewire complete car.
Replace and treat inside of Gas Tank, install new CF/ Fuel Lines.
3) Replace Doors, Windshield, Install Spartan Street/DE Interior, Sparco Vintage
Seats, New Console, MoMo Wheel.
4) Prep car for Paint, all panels prepped, Hood, Trunk, Doors, Targa Top.
5) Replace & Upgrade all Suspension, Brakes, Bushings, Wheels & Tires.

[Vysoc]

TIG TIME only took a full month to get things set up, as usual you would not think it would be that difficult to run 240 - 6 AWG 3 wire through a garage attic into the Mud room where the panel is?
Wrong, took two separate dates with my maintenance/Electrician friend but it is now set-up safely correctly and by the Electrical Codes.
Just plugged her in and fired her up, and she roared to life, looks like Thursday, my next day off will be the big day to start really burning some metal....now I can start
moving forward.
I also need to update this thread to reflect what I put in on my October Update and my November Update.

Photo's of the electrical work coming!!

Vysoc (IMG:style_emoticons/default/flag.gif)