Rear Trunk Cable Release, Pop your trunk from inside the car |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Rear Trunk Cable Release, Pop your trunk from inside the car |
Engman |
Sep 21 2004, 05:14 PM
Post
#1
|
Zoisite Group: Benefactors Posts: 1,349 Joined: 25-March 03 From: New Albany, IN Member No.: 475 |
This mounts the release below the E-brake handle. Everything you will need is included. A cover for the release in the trunk is also provided. Please see http://engmanparts.com for details
Attached image(s) |
Engman |
Sep 24 2004, 05:00 PM
Post
#2
|
Zoisite Group: Benefactors Posts: 1,349 Joined: 25-March 03 From: New Albany, IN Member No.: 475 |
QUOTE similar question about the shaved trunk button, ive taken out the button and filled up that center portion between the rear lights with that red transparent panel that displays Porsche, so the question is will i be able to open the trunk front within the cabin? Yes - this is what this was designed to do. There used to be an electric solenoid kit that was made to do this. I have two of these and have not been able to make them work 100% of the time - usually wind up having to depress the trunk and hit the solenoid button many times to get this to work. I have tried using a relay with direct connection to the battery with 10G wire to no avail. Finally, I decided to develop a reliable option. All new mounting brackets and a cover to make sure that the actuator cannot be jammed from inside the rear trunk. M |