Blue Porscheru Conversion, Subaru 2.5 SOHC NA with Suby Tranny Options

[R_u_dd]

Blue Porscheru Conversion

I started this project back in May of 2014 and wanted to share the journey with my friends and family.
There's something appealing to people about taking a left-for-dead vehicle and bringing it back to life.
I hope this build thread is a bit different than the others. It's a Subaru conversion which is not as common.

I am/was a newbie. This is my first car restoration, if you can call it that.
My welds are not pretty, but I've improved and learned throughout this process.
This is a great car for a first restoration. It's light, simple, and very cool- mid engine with a targa top.

This is the plan- We are starting with a 1971 tangerine 914 with light to moderate rust, nothing too serious.
The original engine was a 1.7. Like so many other 914's it ran but has been sitting for a long time.
The engine seems too far gone to try to rebuild it= lots of rust and corrosion.

Powerplant: 2003 Subaru Impreza TS 2.5 SOHC, Natuaral- No Turbo, Why? Plenty of Power for me and no turbo lag. See Engine Choices thread.
Transmission: Subaru 5MT 2003 Impreza TS
ECU from: 2003 Subaru Impreza TS
Electronics: Wiring Harness simplified by Small Car Performance
Axles: 944 axles and CV's with Subaru inside CV- 4 lug for now.
914 suspension.
No fender flares
Voltage Blue Metallic: (Honda color), Painted Sail Panels.

Before Pictures

(IMG:http://www.914world.com/bbs2/uploads_offsite/i1301.photobucket.com-17072-1486250894.1.jpg)

The Future Look- Concepts

The 914 visualizer, a very cool app.

Current Look:

(IMG:http://www.914world.com/bbs2/uploads_offsite/www.imgur.com-17072-1607919164.1.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/www.imgur.com-17072-1607919164.2.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/www.imgur.com-17072-1607919165.3.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i1301.photobucket.com-17072-1459666779.1.jpg)



Contents

Axles
Blasting Glass Bead Videos
Battery Tray Area
Battery and Tray
Budget Scenarios
Brakes
Bumper - Valence
Clutch
Electronics
Engine Discussion
Engine Mount
Engine Work
Floor Pans and Engman Kit
Fuel Pump
Fuel Tank (Cleaning with Electrolysis)
Paint Prep and Metal Work
Paint Prep Continued
Radiator
Seats and Interior
Seats Re-upholstery Links
Transmission
Transmission Mount
Videos

This thread is for entertainment purposes only. I am not a certified mechanic.
There are many that have pioneered the suby conversion before me, but this
is my story.

Hope you enjoy this thread!

Chris

(IMG:http://www.914world.com/bbs2/uploads_offsite/i1301.photobucket.com-17072-1486249676.1.jpg)

[veekry9]

I'm glad you like it.
I drew this largemouth look to emulate the '50-60s Vette.
An older brother had a convertible from that era,I liked it in '59,still do.
The details are a little deceiving,as the car is much wider than stock.
The inner sponson is pretty much normal,the width of the lites is of course wider and therefore the fender too.
That was the purpose of using the larger lite,the method of achieving the new width is a filler strip at the top of the sponson.
A lot of planning,mapping and hammer and dolly work,for the wide narrowbody look.
How it would look without new doorskins is up for debate,the stepout being up to 6".
Note too that the bumper is widened the same amount.

http://www.914world.com/bbs2/index.php?sho...22522&st=51
Just flogging some ideas around,seeing what fits.

[R_u_dd]

Yes, I really like that look for the form and function of it. It looks like a nice design to pull air through a front radiator. What can you tell me about that car? Is it pure animation, or is it a real car? What is the color? Perhaps you have more pictures. What software did you use to change the look?