Cold Start Squirters on six, anyone know details?? Options

[gereed75]

I have an aircleaner box that still has the squirter manifolds and the fuel line that feeds them.

I thought it would be cool to leave them in and mock up the connection.

Does anyone have a pix or know where the feed line for these connected and how was it routed??

Could not find it in PET or the shop manual. From what I can learn, the 911 one was connected to a T and a solenoid that was in the tunnel. What about the six??

[mskala]

I'm pretty sure I have the squirter stuff that the first owner took off, sitting in
the pile of parts in the basement.

Also, here is a couple things about the 'dashpot'.

[gereed75]

I'm pretty sure I have the squirter stuff that the first owner took off, sitting in
the pile of parts in the basement.

Also, here is a couple things about the 'dashpot'.

Cool Mark, I'll show you mine if you show me yours (IMG:style_emoticons/default/shades.gif)

[mskala]

Here is all I found


You can barely see in the airbox the two holes that were plugged and the
clips that hold the lines, which may not be the lines in my pic.

[gereed75]

Here is all I found


You can barely see in the airbox the two holes that were plugged and the
clips that hold the lines, which may not be the lines in my pic.

Yep, those are the lines that fit in the air box. I actually have two of the 90 degree ones and one of the tee's. I also have the outside braided fuel line that connects them. That's all I got.

Fiddle with them a bit and you will see how they fit in the air cleaner box holes and clips.

I am traveling this week and can not get pix.