FS - SS fuel lines, engine compartment lines,, all 4, fuel tank socks, sealing rings, FI hose clamps, grommets Options

[Rotary'14]

I've made this set, it's 9.5 mm SS .028 tubing, and 8mm SS .028. The ends have beads to keep the fuel lines from blowing off. I've bent it and test fitted the prototypes upon my car. They fit very well IMHO.

Engine Compartment $25 each + $15 shipping
Engine Compartment set (2 lines) $45 + $15 shipping

Tunnel fuel line each $40 + $25 shipping
Tunnel fuel line (set of 2)$75 + $35 shipping

If ordering a complete set shipping will be $40 in continental US.



complete your installation with the following,,,

Fuel tank fuel sock $10
Fuel tank sealing ring NLA for now
Firewall grommets $2.00 each
Engine shelf grommets $4.00 each
FI hose clamps $2.00 each or $1.75 each(if you order more than 10)
Shipping included if you buy a set of lines.


Thanks for looking!

[Rotary'14]

I put together an install video,,,

http://www.youtube.com/watch?v=hxFRQTWLetw

There is a still image where I show a drill, WD-40 and the stock grommet. You only need this if you are using a 9.5mm return line.

[malcolm2]

I put together an install video,,,

http://www.youtube.com/watch?v=hxFRQTWLetw

There is a still image where I show a drill, WD-40 and the stock grommet. You only need this if you are using a 9.5mm return line.

what happened to your video?

[Rotary'14]

I put together an install video,,,

http://www.youtube.com/watch?v=hxFRQTWLetw

There is a still image where I show a drill, WD-40 and the stock grommet. You only need this if you are using a 9.5mm return line.

what happened to your video?

I contacted youtube and as of today 5/17/2016 the video seems to work,,, with sound too!