 Axles and CV Joints, Looking for source |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| North Coast Jim |
  Jun 13 2016, 12:12 PM
Post
#1
|
|
Member  Group: Members Posts: 331 Joined: 11-December 15 From: Northern Ohio Member No.: 19,450 Region Association: MidAtlantic Region 
 |
After much time and expense I've thrown in the towel on rebuilding these high mileage units. Started with 4 axles and got it down to two what I thought serviceable units, actually they were what was left after inspecting the others. Trying today to assemble them has not produced anything except frustration. Watched Van Swenson U Tube posting on the subject and thought it possible. CV's cleaned and rebuilt properly and assembled on the axle. No amount of effort along with a large amount of foul language will get the C clip to stay within the groove. Arghhhhh !!!!! Tried it on two CV's with different components and the same result. Given up. So...................are there suppliers of finished 914 Axles with CJ Joints out there ??
|
   |
 
|
  |
Replies
| iankarr |
Jun 13 2016, 09:00 PM
Post
#2
|
|
The wrencher formerly known as Cuddy_K Group: Members Posts: 2,528 Joined: 22-May 15 From: Heber City, UT Member No.: 18,749 Region Association: Intermountain Region
|
I got mine from Jim Ellis Porsche. $280 ea.
http://www.porscheatlantaperimeterparts.co...1433200903.html And an unboxing vid... http://youtu.be/3DGaHp-OAKo |
|
|
|
| Mueller |
Jun 13 2016, 09:41 PM
Post
#3
|
|
914 Freak! Group: Members Posts: 17,150 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None
|
QUOTE(cuddyk @ Jun 13 2016, 08:00 PM)  I got mine from Jim Ellis Porsche. $280 ea. http://www.porscheatlantaperimeterparts.co...1433200903.html And an unboxing vid... http://youtu.be/3DGaHp-OAKo Gave you a thumbs up! I'd have to say these are made correctly from the start and not reworked VW spec parts based on the coloring of the CVs and the feature in question. (I have a hard time thinking they would disassemble, machine, send out for black oxide and then reassemble them at that low of a price. . I know all about the machining of the type 1 since I did a few batches of Meyle CV's for a vendor here until he went with better parts and a more local source. (I still have the fixtures and 10mm drill I bought just for those (IMG:style_emoticons/default/smile.gif) That being said I could be wrong (IMG:style_emoticons/default/smile.gif) |
|
|
|
Posts in this topic
North Coast Jim Axles and CV Joints Jun 13 2016, 12:12 PM
malcolm2 Yes, several have done much R&D. I bought 2 C... Jun 13 2016, 12:20 PM Mr. Olympic Blue 2 You Complete Oem axles are once again available from P... Jun 13 2016, 01:01 PM
North Coast Jim
Complete Oem axles are once again available from ... Jun 13 2016, 07:14 PM Amphicar770 Ordered mine from the Porsche dealer. Brand new a... Jun 13 2016, 02:29 PM theleschyouknow I thought I read somewhere (probably on this board... Jun 13 2016, 04:57 PM mepstein
I thought I read somewhere (probably on this boar... Jun 13 2016, 09:22 PM cuddyk
I thought I read somewhere (probably on this boa... Jun 13 2016, 10:09 PM Mueller
[quote name='mepstein' post='2359016' date='Jun 1... Jun 13 2016, 10:12 PM theleschyouknow
[quote name='mepstein' post='2359016' date='Jun 1... Jun 14 2016, 02:09 PM Geezer914 PMB Performance. Jun 13 2016, 11:46 PM JoeD I bought an OEM set from Jim Ellis in March. ... Jun 14 2016, 09:04 AM stugray This place advertises $200 for each axle:
ht... Jun 14 2016, 01:11 PM mepstein
This place advertises $200 for each axle:
h... Jun 14 2016, 02:05 PM Eric_Shea Angle is proper if you use GKN/Loebro. All of the... Jun 14 2016, 04:36 PM North Coast Jim Bought a set of the newly released Porsche 9143320... Jun 15 2016, 06:01 AM Darren C Just bought a pair of rear axles complete with all... Jun 15 2016, 06:30 AM Racer Chris Good to know that Porsche has anted up with the co... Jun 15 2016, 07:20 AM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th January 2025 - 05:18 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.