DTM for a 914, Speak up if you want it developed!! Options

[Jake Raby]

Okay guys... Give me some input here..

I am looking into making a completely new DTM system for a 914 application. It will utilize the stock oil cooler in the stock position and will fi with a modified rain tray (that would come with the kit).......... The basic shroud will stay the same and will keep in emphesis even running temps between the left and right bank cylinders and will do so about 25% better than the stock arrangement while looking alot neater and dropping 30-40 pounds of weigh off the engine and adding a ton of simplicity

It will come complete with all necessary tinware to seal the ebngine bay, and etc. It will only work with individual runners carbs/fi. I am working on an FI plenum for all my DTMS as we speak and that will be available in 2005.

So, who wants one or is even remotely interested? If I don't get 15 dedicated souls I'm not doing the development as its just not worth it to spend dozens of hours making the molds.

Cost would be around 700.00 for the complete kit.
SPEAK UP!!!!!!!

[bernbomb914]

with this system you can kiss your overheating blues goodby. just think no more dropped valve seats. you wont need external oil coolers, Its cheap at half the price

Bernie