Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Leaking fuel tank, Fixed - but a heads up
DaveO90s4
post Jan 29 2017, 05:23 AM
Post #1


Member
**

Group: Members
Posts: 149
Joined: 26-April 16
From: Australia
Member No.: 19,935
Region Association: None



Hi all,

Arrived home from holiday to find my 914, parked in the shed, surrounded by a very large puddle of petrol.

Was leaking from one of the connections at the bottom of the tank. 'Nipping' up the 22mm bolt reduced the leak to a weep, but did not fix the problem.

So I removed the fittings to see what the problem was.

Well, the short steel tube that protrudes into the tank (and which the nut goes around) was bottoming inside the tank. That meant the nut could not seal when done up tight.

The solution was simple:- cut4-5 mm off the end that goers into the tank so when the nut is done up it seats on the washer, without the tube bottoming out.

My 1975 car had a rusty tank - this is a tank from a different model. Maybe Fritz changed the specs between years (or I'd put the wrong tubes in to the wrong holes).

In any event, all fuel tight now, but worth checking the tube shaft length and tank receiver length if swapping tanks.

Cheers

Dave

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
second wind
post Jan 29 2017, 12:28 PM
Post #2


Senior Member
***

Group: Members
Posts: 862
Joined: 30-December 10
From: Los Angeles, California
Member No.: 12,543
Region Association: Southern California



QUOTE(DaveO90s4 @ Jan 29 2017, 03:23 AM) *

Hi all,

Arrived home from holiday to find my 914, parked in the shed, surrounded by a very large puddle of petrol.

Was leaking from one of the connections at the bottom of the tank. 'Nipping' up the 22mm bolt reduced the leak to a weep, but did not fix the problem.

So I removed the fittings to see what the problem was.

Well, the short steel tube that protrudes into the tank (and which the nut goes around) was bottoming inside the tank. That meant the nut could not seal when done up tight.

The solution was simple:- cut4-5 mm off the end that goers into the tank so when the nut is done up it seats on the washer, without the tube bottoming out.

My 1975 car had a rusty tank - this is a tank from a different model. Maybe Fritz changed the specs between years (or I'd put the wrong tubes in to the wrong holes).

In any event, all fuel tight now, but worth checking the tube shaft length and tank receiver length if swapping tanks.

Cheers

Dave




Haven't driven my '73 2.0 for a month and noticed a running stream of gas leaking out yesterday...WTF !!! Turns out end of fuel line rotted to hell. Fuel line under a year old....anyone know why it failed? I use BG 44K all the time but rep says it does not hurt fuels lines.....any ideas out there? Thankj you.
gg
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 31st October 2024 - 07:27 PM