LEDs and housings in stock see post 48----GB ENDS 8/1/17, Got more back in for those that need them Options

[Mikey914]

I've been able to source some very good LEDs for our car. It took some trial and error, but have been able to locate and check fit to assure these will work on our cars

Option 1-
I have H4 housings just want LEDs I know will fit without any issues - Not DOT approved 2600 lumens- $32 per bulb

Option 2-
I have H4 housings want the BEST LED I know will fit that DOT approved Watertight 3000 lumens
$48 bulb

Option 3-Plug and play Jeep series LED complete housed unit DOT approved 3000 lumens
$98 per unit.


For those that want New H4 no sealed beam housings we are looking at buying in bulk and providing at cost. So don't worry if you don't have an H4 housing. They are not that expensive, and we will try to get the best price possible for them.

We may be able to do better on these is we can get some volume, but wanted to test the waters.

Pictures to follow

[Mikey914]

Trying to understand the question.
Is the High beam not coming on period? Or is the issue the relay not staying on powering both. I suspect it's a relay issue if the High beams work. The relay is not internal to the LED. It's at the fuse panel area. Many of the old ones are silver.

Mikle Bellis did a good write up of an alternate option to the $50 OEM one.

You may find this thread enlightening .... pardon the pun.




http://www.914world.com/bbs2/index.php?sho...eadlight++relay