My vintage race project, yes... my first pictures are included Options

[brant]

Where to start....

We'll, I know there has been a lot of talk about this car but no pictures previously...

thanks to all the helpful advice I finally got my first camera, and thanks to some tech support from members of this group I think I finally figured out how to use it also...

First off in this thread, I wanted to recognize someone...
I want to recognize my father.
the "project" below is largely the results of his efforts and hard work... Its been a ton of hard work and it wouldn't be possible without him... He doesn't hear it enough from me, but I really appreciate him and what he has done for me.

Now for the pics...
the first one is a PPI picture from the seller when I bought it around 3 years ago. We got it running and drove it for 3 months before starting the demolition almost 2 years ago:
(drum roll please for my first ever pic)

[brant]

Here you can see the rear mounting point for this console brace. Its welded to the frame where the -4 mounts are normally.

you can also see our fuel pressure regulator.

also note that we will not run any tin work or chassis tin in the engine bay.

finally here is bit of the motor mount. Its a patrick-bulkhead.

Oh.. picture doesn't show it, but on the outboard side of the rear suspension there is another heim joint that is a toe adjuster. It runs forward from the suspension cup and along the longitudinal. It bolts to the long, where the jack points used to be. You can barely see the mounting bolt for it in one of the first pictures with the exposed long. (no more jack points):