 Need help identifying pinging sound cylinder 3 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| nditiz1 |
 Sep 10 2017, 02:15 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,191 Joined: 26-May 15 From: Mount Airy, Maryland Member No.: 18,763 Region Association: MidAtlantic Region 
 |
I recently adjusted my vales .06/.08 and also rebuilt my carbs. They were done separate and driven in between. I'm now noticing a pinging sound coming from the carb barrel on cylinder 3. If I put my hand over the carb throat it makes the sound go away. It is doing this at idle of ~950. I will load a video of the sound. What do you all think?
|
   |
 
|
  |
Replies
| nditiz1 |
Sep 11 2017, 04:14 AM
Post
#2
|
|
Senior Member Group: Members Posts: 1,191 Joined: 26-May 15 From: Mount Airy, Maryland Member No.: 18,763 Region Association: MidAtlantic Region
|
I did adjust the mixture screws and synched the carbs. That carb barrel did need me to set the idle air screw where the other 3 did not. I did this to sync carb barrels on the same carb with each other. The other 3 carbs have the screws bottomed out per Weber adjustments.
I did not check the timing as it was set before I adjusted valves and rebuilt carbs. I will double check it is still correct. |
|
|
|
Posts in this topic
nditiz1 Need help identifying pinging sound cylinder 3 Sep 10 2017, 02:15 PM
nditiz1 Here is the link to the clip:
https://youtu.be/aS... Sep 10 2017, 03:29 PM DM_2000 I'm on a slow internet connection at the momen... Sep 10 2017, 03:35 PM nditiz1 Let me know what you think after you watch the vid... Sep 10 2017, 05:43 PM DM_2000 In the mean time, are you getting fuel standoff ab... Sep 10 2017, 06:43 PM porschetub Read this and thought the noise may be lean spitba... Sep 10 2017, 10:24 PM nditiz1 After doing some more reading, I realized I did no... Sep 11 2017, 06:43 AM nditiz1 Readjusted the idle bypass screws on all to 1/2 tu... Sep 11 2017, 09:44 AM rhodyguy Check the flow on each Venturi with all 4 air by-p... Sep 11 2017, 01:08 PM nditiz1 @rhodyguy
I originally had all seated. I then no... Sep 11 2017, 02:28 PM rhodyguy Try going the other direction. IN not out. It... Sep 11 2017, 02:33 PM
nditiz1
Try going the other direction. IN not out. It... Sep 11 2017, 03:09 PM porschetub You mentioned the carb on the effected side won... Sep 11 2017, 03:19 PM nditiz1
You mentioned the carb on the effected side won... Sep 11 2017, 03:31 PM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th June 2024 - 06:18 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.