Clutch arm position ?, correct or not... Options

[porschetub]

Based on what I have studied I seem to think this is not right,new pressure plate/disk,new cable,rebuilt pedal assembly etc ,etc and unknown flywheel in good condition,thinking it has been heavily machined,pedal adjustment is by the book...my idea is the lever is hitting the trans case when pedal fully down...help please before I pull the g/box again.

TIA guys.
P.S.clutch cable tube is fine.

[r_towle]

Cut a board to fit sideways in front of the seat to protect the seat. Cut a board to push against the clutch pedal and the other board to hold the pedal down.

Or
Pack around the clutch release fork with clay
Push pedal
Go measure clay

You should feel it hit the tranny case at the back if the condition you believe actually exists.

[porschetub]

Cut a board to fit sideways in front of the seat to protect the seat. Cut a board to push against the clutch pedal and the other board to hold the pedal down.

Or
Pack around the clutch release fork with clay
Push pedal
Go measure clay

You should feel it hit the tranny case at the back if the condition you believe actually exists.

Thanks but no need ,confirmed the lever was hitting....too much "lost motion" on the arm besides.
How the hell do I remove the pivot ball, (IMG:style_emoticons/default/WTF.gif) who was the moron that designed that (IMG:style_emoticons/default/sad.gif) (IMG:style_emoticons/default/sad.gif) .