 Forum Opinion Please, Weber 44 or 40 on stock 2.0 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Derek Seymour |
 Oct 7 2017, 01:40 PM
Post
#1
|
|
Member  Group: Members Posts: 394 Joined: 10-March 09 From: Yucaipa Member No.: 10,151 Region Association: Southern California  |
Currently have 44's that were just rebuilt, my experience is that 44's are a little big, and you need at least 2200 cc's of displacement to fully utilize the throatsize.
What's your experience/advice/opinion? |
   |
 
|
  |
Replies
| Mblizzard |
Oct 9 2017, 11:34 AM
Post
#2
|
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
You will see lots of opinions on this. I went with 44s and they were too big until as it has been pointed out, I downsized the venturi's.
Many have more experience and likely have better advice but I would go with the 40s. They are a closer match to what your engine will need and going through the process of buying different venturi's, jets, mains, Emulsion Tubes...... and on can become expensive and a real headache. The 40s comes stock with 28 Venturis and they were capable of giving my 2056 all it needed. You can go up to a 36 Venturi on the 40s but you will be hard pressed to ever need that. Note the 44s come with 36 Venturis so unless you plan on making it a "TOP END" performing motor you can get all you need from the 40s.  |
|
|
|
Posts in this topic
Derek Seymour Forum Opinion Please Oct 7 2017, 01:40 PM
SirAndy Currently have 44's that were just rebuilt, my... Oct 7 2017, 01:54 PM GeorgeRud You need the velocity and vacuum for Weber’s to ... Oct 7 2017, 02:21 PM
Gatornapper GR -
Rebuilding my 44's now, the venturi... Oct 8 2017, 05:49 PM porschetub
GR -
Rebuilding my 44's now, the venturi... Oct 8 2017, 06:01 PM Perry Kiehl I'd go with 40's Oct 7 2017, 06:31 PM Larmo63 :agree:
Common sense. Oct 7 2017, 06:33 PM larryM the correct answers are in the Weber Tech manual b... Oct 7 2017, 08:41 PM porschetub
You will see lots of opinions on this. I went wi... Oct 9 2017, 04:33 PM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th December 2024 - 03:20 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.