 My vintage race project, yes... my first pictures are included |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| brant |
 Nov 1 2004, 07:08 PM
Post
#1
|
|
914 Wizard  Group: Members Posts: 11,793 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains 
 |
Where to start....
We'll, I know there has been a lot of talk about this car but no pictures previously... thanks to all the helpful advice I finally got my first camera, and thanks to some tech support from members of this group I think I finally figured out how to use it also... First off in this thread, I wanted to recognize someone... I want to recognize my father. the "project" below is largely the results of his efforts and hard work... Its been a ton of hard work and it wouldn't be possible without him... He doesn't hear it enough from me, but I really appreciate him and what he has done for me. Now for the pics... the first one is a PPI picture from the seller when I bought it around 3 years ago. We got it running and drove it for 3 months before starting the demolition almost 2 years ago: (drum roll please for my first ever pic) Attached image(s) 
|
   |
 
|
  |
Replies
| brant |
Nov 15 2004, 07:28 PM
Post
#2
|
|
914 Wizard Group: Members Posts: 11,793 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains
|
Back in the begining of this thread, I mentioned that my roll cage had extra large foot pads. Its not an Engeman kit by any means, but the foot pad is unique.
Its one piece that does a bit of reinforcing in the lower corner on the long, and also comes up and ties into the firewall.. (on the hell hole side there is a similiar bracket that ties into the back of the firewall)... Remember, I'm not allowed to weld in bracing really... So this is technically a foot pad for my roll cage: Attached thumbnail(s) 
|
|
|
|
Posts in this topic
brant My vintage race project Nov 1 2004, 07:08 PM
brant These are just some PPI pictures of the rear trunk... Nov 1 2004, 07:19 PM brant Uno mas... Nov 1 2004, 07:19 PM trekkor Good for you :trophy:
Post often with pics.
You ... Nov 1 2004, 07:22 PM Jeroen keep em coming! Nov 1 2004, 07:23 PM brant Wow...
just another example of the great help from... Nov 1 2004, 09:24 PM brant We (my dad and I) always have run our old -4 race ... Nov 1 2004, 09:29 PM brant the coolers are the twin pass fluidynes...
the fu... Nov 1 2004, 09:32 PM brant Here is a shot of the air exit.
also in this shot... Nov 1 2004, 09:35 PM brant Here is the cooler on the other side...
also a clo... Nov 1 2004, 09:37 PM Stutgart46 Looks great. Keep the pics coming. Nov 1 2004, 09:41 PM brant Race class rules allow no weld in bracing... only ... Nov 1 2004, 09:42 PM brant fuel system...
I learned from AJ that its tough to... Nov 1 2004, 09:49 PM brant Since all of these are front trunk pictures... her... Nov 1 2004, 09:51 PM brant Another front item...
boy... posting pictures is ... Nov 1 2004, 09:54 PM brant More body. I'm pretty proud of the fenders.
I... Nov 1 2004, 09:58 PM brant Another shot of the same fender....
also visible i... Nov 1 2004, 10:01 PM brant A little bit of motor pic snuck in that one.
Here ... Nov 1 2004, 10:05 PM brant You can't see it in this shot, but here is a f... Nov 1 2004, 10:10 PM brant Its way past my dinner time so only another one or... Nov 1 2004, 10:14 PM brant Here is the seam welding on the rear towers inside... Nov 1 2004, 10:18 PM brant too much fun...
I've gotta go for now.
I... Nov 1 2004, 10:19 PM campbellcj dOOd, that is one sweet project!!! :t... Nov 1 2004, 10:25 PM campbellcj BTW if John Kelley wants to make & sell those turn... Nov 1 2004, 10:29 PM rick 918-S Nice work! Nov 1 2004, 10:39 PM john rogers Really great loking work! I'd keep a close... Nov 1 2004, 11:36 PM ablose58 Very nice, It looks like it will be a real nice ri... Nov 2 2004, 04:19 AM Jeroen Wow Brant. This was sure worth the wait over the p... Nov 2 2004, 05:43 AM synthesisdv brant,
the car looks awsome. i didn't catch ... Nov 2 2004, 06:43 AM brant Thanks for all the feed back fellas...
I was so ex... Nov 2 2004, 11:55 AM brant Couple more pictures.
I don't think I mention... Nov 2 2004, 12:06 PM brant In this one there is more roll cage.
Also a bit of... Nov 2 2004, 12:08 PM brant here is that pedal cluster a bit more clearly: Nov 2 2004, 12:09 PM brant Next, I've got a few motor bay shots.
In our o... Nov 2 2004, 12:13 PM brant Here you can see the rear mounting point for this ... Nov 2 2004, 12:19 PM brant Dad made up the new hard brake lines.
This pictur... Nov 2 2004, 12:21 PM Chris Julian Very nice work. :trophy: :trophy:
The car see... Nov 2 2004, 01:28 PM Ferg Yippie Brant has a camera! :trophy: Now eve... Nov 2 2004, 01:32 PM J P Stein Brant:
Tho I knew you'd been plugging away at... Nov 2 2004, 02:00 PM 3d914 Very nice car - Brant!
Can't wait to see ... Nov 2 2004, 02:01 PM scruz914 brant ... Nov 2 2004, 02:12 PM brant Let me try this re-sizing thing....
if this comes... Nov 2 2004, 02:16 PM mikerose This is pure porsche PORN
:trophy: Nov 2 2004, 02:20 PM Quebecer This is beautiful work Dude!
Keep it up!... Nov 2 2004, 02:35 PM Root_Werks Nice car! This thread/forum rocks! :head... Nov 2 2004, 02:42 PM PorscheTom Wow, beautiful job!
Your racing group is goin... Nov 2 2004, 02:59 PM Steve Thacker :trophy: :trophy: :trophy: :trophy:
That is o... Nov 2 2004, 04:19 PM GTeener Look'n real good!
:wub:
Keep it up... Nov 2 2004, 04:21 PM brant brant Here are a few detail photo's that show where ... Nov 15 2004, 03:45 PM brant still playing with size... let me try this a tad s... Nov 15 2004, 03:53 PM brant One more "dead" weight picture...
I filled the tru... Nov 15 2004, 04:13 PM brant Here are a couple of pics on weight savings items.... Nov 15 2004, 04:23 PM brant Brake reservoir attatchment: Nov 15 2004, 04:26 PM brant Here is the plug that dad made to replace the back... Nov 15 2004, 04:28 PM brant Oil filler neck, and weight saving upright: Nov 15 2004, 04:48 PM brant I mentioned my fender linings before.
I used conta... Nov 15 2004, 06:18 PM brant I also previously mentioned that my dad had built ... Nov 15 2004, 06:45 PM brant I reassembled the carbs onto the motor this weeken... Nov 15 2004, 06:53 PM brant One more that shows the fuel blocks: Nov 15 2004, 06:54 PM brant close up of other side: Nov 15 2004, 06:57 PM brant I had to take this one...
I'd like to call it ... Nov 15 2004, 07:01 PM brant underside pic...
Here is the oil cooler that AJ mo... Nov 15 2004, 07:06 PM brant Starter off of my -4 retired racer: Nov 15 2004, 07:08 PM brant Trial fit on the header.
They are Jet hotted.
oil ... Nov 15 2004, 07:10 PM brant Rear tranny mounts are delrin: Nov 15 2004, 07:12 PM brant This isn't finished yet.
but here is the front... Nov 15 2004, 07:14 PM brant And this one is a shot of it from underneath...
It... Nov 15 2004, 07:16 PM brant This is just a front trunk view from the second si... Nov 15 2004, 07:24 PM Stutgart46 Brant,
If you ever need someone to drive that thin... Nov 15 2004, 07:28 PM brant QUOTE
914MF :worship: :worship: :worship: :worship: :worsh... Nov 16 2004, 09:08 AM brant majkos :o Unbelievable! :o
Keep up the awsome work... Nov 16 2004, 10:46 AM Jeroen Gint I hate to horn in here, and I'll delete this p... Nov 16 2004, 05:20 PM
brant Kevin,
you underestimate your self...
people do... Nov 16 2004, 06:04 PM |
19 User(s) are reading this topic (19 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 22nd November 2024 - 08:30 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.