3.2 Conversion - outlaw Street and track car project, (Was “Would you do This 1400 mile road trip?) Options

[davehg]

Last year I bought a 914-6 conversion with a 3.2. The car was an autocross car, and the PO had removed everything that wasn't essential - no more side windows and mechanism, no door panels, no carpet, no radio, no heater. Nada.

I had a mechanic friend go through, check and adjust everything, and the car runs great! It's loads of fun to run up and down Hwy 74 in the desert. It does smoke at idle, and needs a top end job, but otherwise ok, brakes are fine and tires are new, though the toe needs to be adjusted for a road trip. The car is geared for the track, and 80mph runs at 4.5kRPM. Oh...new battery too.

I've put about 800 miles on it since I bought it and the only issue was a faulty switch easily replaced. I'm planning to bring it back and upgrade the interior and do a top end job.

I'm bringing it back to the PNW and the cost to ship is $1200. I have a flatbed car trailer and can tow it, but finding the time to go down and fetch is a challenge - I'd need a week - three days down a day to pack up, and three days back, and the fuel/hotel costs wouldn't be much less than shipping up. Plus, crossing CA at 55mph with a trailer makes me want to puke in my mouth.

So....I had an idea. Me and my 16 year old kid pack light, fly into Palm Springs, and do the 1300-1400 mile trip home, stay off I5 and take my favorite motorcycle twisty roads home (I've done this trip on various motorcycles and cars over the years). The downsides - race seats, no creature comforts, wind blowing, may be very hot in the summer, my ass will ache at the end of a 350 mile day, and if we break down...well, that's when the real adventure begins, right?

Upsides - just about everything else, and we'd have that trip to remember for ages.

So what say you? Do the trip? Or bring the car back home the more secure way? If we do the trip, what should I bring along? Fuel pump? Relays? (going to bring plugs, belt, small tool kit, fuses)

Here's the pix of the car for clarity:

(IMG:http://www.914world.com/bbs2/uploads_offsite/i.imgur.com-21443-1505926526.2.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i.imgur.com-21443-1505925313.3.jpg)

[davehg]

I need some advice from anyone familiar with the roads from Victorville to Lancaster on this stretch of Day 1: https://binged.it/2uwfjq9

The road I'm looking at is Pine Canyon Rd - wondering if this is decent and worth taking (vs. staying on 138).

Thinking I gas up once in Frazier Mountain, and again at the end of the route. I am usually seeing 20-22mpg from the 3.2, giving me a decent range between fillups.

I am avoiding Hwy 2 - it is long, may have some construction/repaving, and I want to save up energy for the rest of the trip. I've done this Hwy on a motorcycle (same with Mulholland) so nothing I need to experience.