 seat out.....take relays out ?, 1974 914 1.8 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| brcacti |
 Nov 2 2019, 03:52 PM
Post
#1
|
|
1974 914 1.8  Group: Members Posts: 674 Joined: 17-July 19 From: PHX AZ 60 miles south Member No.: 23,302 Region Association: Southwest Region  |
1974 914 I have the passenger seat out, do I disconnect both of these relays or just one so I don't have to have the seat belt fastened to start the car? and what about these other two connections?
   |
   |
 
|
  |
Replies
| FlacaProductions |
Nov 6 2019, 11:45 AM
Post
#2
|
|
Senior Member Group: Members Posts: 1,648 Joined: 24-November 17 From: LA Member No.: 21,628 Region Association: Southern California 
|
put the yellow wires back and see if it cranks.
|
|
|
|
| brcacti |
Nov 6 2019, 02:53 PM
Post
#3
|
|
1974 914 1.8 Group: Members Posts: 674 Joined: 17-July 19 From: PHX AZ 60 miles south Member No.: 23,302 Region Association: Southwest Region |
QUOTE(FlacaProductions @ Nov 6 2019, 10:45 AM)  put the yellow wires back and see if it cranks. Hello, yes I put new connections on the two yellow wires and plugged them back into where they were before, won't crank. From the add on starter relay I get a reading of 12.47 from the big black to the yellow and same reading from the big black to the white. NO READING from the big black to the 1/4 inch nut connection that I used to jump start this way, now nothing. Did I burn out my add on starter relay?   |
|
|
|
Posts in this topic
brcacti seat out.....take relays out ? Nov 2 2019, 03:52 PM
brcacti Hello, I ended up taking the small one out and put... Nov 2 2019, 05:46 PM FlacaProductions I left them both in and connected the two fat yell... Nov 2 2019, 08:53 PM jcd914 No matter what you do with the relays, you have to... Nov 2 2019, 11:11 PM
brcacti
No matter what you do with the relays, you have t... Nov 3 2019, 12:35 PM FlacaProductions don't worry about the relays - just do the two... Nov 3 2019, 04:49 PM brcacti
don't worry about the relays - just do the tw... Nov 3 2019, 06:39 PM JeffBowlsby DONT CUT ANYTHING!
Get the splice housing. D... Nov 3 2019, 08:13 PM brcacti
DONT CUT ANYTHING!
Get the splice housing. ... Nov 4 2019, 03:52 PM sixnotfour
just leave it at this...... Nov 4 2019, 03:57 PM brcacti
just leave it at this......
I got in trouble...... Nov 5 2019, 06:13 PM FlacaProductions does not crank or does not start?
did you disconne... Nov 5 2019, 09:15 PM brcacti
does not crank or does not start?
did you disconn... Nov 6 2019, 05:13 AM brcacti
[quote name='FlacaProductions' post='2759846' dat... Nov 6 2019, 03:19 PM porschetub If you have bridged the 2 large yellow wires toget... Nov 6 2019, 04:49 PM |
10 User(s) are reading this topic (10 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th June 2024 - 06:48 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.