 seat out.....take relays out ?, 1974 914 1.8 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| brcacti |
 Nov 2 2019, 03:52 PM
Post
#1
|
|
1974 914 1.8  Group: Members Posts: 674 Joined: 17-July 19 From: PHX AZ 60 miles south Member No.: 23,302 Region Association: Southwest Region  |
1974 914 I have the passenger seat out, do I disconnect both of these relays or just one so I don't have to have the seat belt fastened to start the car? and what about these other two connections?
   |
   |
 
|
  |
Replies
| porschetub |
Nov 6 2019, 04:49 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 4,708 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None |
If you have bridged the 2 large yellow wires together the car will crank and start regardless of the relays being in place,use a sealed connector such as a Duraseal (yellow) so no moisture can get in there,make sure the yellow wire that leads off here is a good fit on the starter solenoid....you should be good.
|
|
|
|
Posts in this topic
brcacti seat out.....take relays out ? Nov 2 2019, 03:52 PM
brcacti Hello, I ended up taking the small one out and put... Nov 2 2019, 05:46 PM FlacaProductions I left them both in and connected the two fat yell... Nov 2 2019, 08:53 PM jcd914 No matter what you do with the relays, you have to... Nov 2 2019, 11:11 PM
brcacti
No matter what you do with the relays, you have t... Nov 3 2019, 12:35 PM FlacaProductions don't worry about the relays - just do the two... Nov 3 2019, 04:49 PM brcacti
don't worry about the relays - just do the tw... Nov 3 2019, 06:39 PM JeffBowlsby DONT CUT ANYTHING!
Get the splice housing. D... Nov 3 2019, 08:13 PM brcacti
DONT CUT ANYTHING!
Get the splice housing. ... Nov 4 2019, 03:52 PM sixnotfour
just leave it at this...... Nov 4 2019, 03:57 PM brcacti
just leave it at this......
I got in trouble...... Nov 5 2019, 06:13 PM FlacaProductions does not crank or does not start?
did you disconne... Nov 5 2019, 09:15 PM brcacti
does not crank or does not start?
did you disconn... Nov 6 2019, 05:13 AM FlacaProductions put the yellow wires back and see if it cranks. Nov 6 2019, 11:45 AM brcacti
put the yellow wires back and see if it cranks.
... Nov 6 2019, 02:53 PM brcacti
[quote name='FlacaProductions' post='2759846' dat... Nov 6 2019, 03:19 PM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th June 2024 - 06:35 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.