It's on PMs sent -GB for Trailing Arm bushings Rubber and option for Urethane, Who's interested? 4 pcs (one car) $28 a set rubber $36 Poly Options

[Mikey914]

We are in the process of doing the A arm bushings in rubber
We can easily do these up in a polyurethane at the same time, just have to do enough to pay for the materials and set up would be looking at 25 sets to do the Poly

The GB would be for a set of 4 (enough for 1car)

For $28 in rubber

and $36 in poly

To get the pricing right we need 40 takers in rubber and 25 in Poly


We've been in testing on these for some time and had made a couple variations.
This is what they look like.

SO Who's in?

[bdstone914]

@Mikey914

Are the shafts going to be offered in a bundle deal?

I have found most original shafts are not straight which makes bushing installation very difficult.

I have done several sets of the Elephant Racing sets and the installation is tricky.

Good installation tools are a must.

I added tapers to the Elephant tools. Delrin might be more slippery and better.

I have a couple clean blasted trailing arms and would be willing to install them.

I also have sets of used shafts for test installation.

I am betting the new shafts will make installation much easier.

Bruce