Rebuiding Inside-out Options

[bkrantz]

I realize most rebuilds go from the inside to the outside, but I am struck by how straight and clean the outer panels, including paint, look on my 73 2.0. And all the nasty stuff is hidden underneath--which I know is also not unusual.

Any way, I bought the car knowing most of what it was: a 2.0 with all the sport and appearance group equipment, including 5 good Fuchs, and the original fuel injection. The original engine is confirmed by a COA. In contrast to the exterior the interior was mixed at best, with some funky carpet. And the front and rear trunks (and engine compartment, and interior) had been sprayed with black undercoating.

So after a month, I have the car stripped to a bare shell, except for suspension and steering. I measured everything I could, and the body is very square and on spec. I need to patch some local rust spots, and replace the rear floor. And then do some minor straightening: right headlight bucket, front edge of right front fender, rear panel, etc.

[FourBlades]

Nice work! (IMG:style_emoticons/default/first.gif)

Great to fix things the correct way.

You are making rapid progress.

These cars are worth much more now then they were when new, kind of ironic.

John

[bkrantz]

Nice work! (IMG:style_emoticons/default/first.gif)

Great to fix things the correct way.

You are making rapid progress.

These cars are worth much more now then they were when new, kind of ironic.

John

Thanks. It is fun indulging my sense of "doing it right", even if my skills are not pro level. And while I do not expect to make money, at least the hole will not be too deep.