Time to un-DAPO the "new" car, Bad things happened to a nice car Options

[BillC]

So, I bought a "new" 914 a few weeks ago (a '73 2.0). When I received it from the shipper, I noticed was the seller was quite artful about his pictures, with what was and what wasn't shown. And, now that I've had a chance to start taking things apart, I have uncovered quite a bit of DAPO-done-damage, and I'm sure there's more hiding somewhere (oh boy! something to look forward too....). Some of the damage appears to have been there for a loooong time.

I've already received a piece from a scrap car to fix this hole:


Once I took the rockers off, I discovered this:

Yes, they hole-sawed through FOUR layers of sheet metal, including the heat duct. Not sure what they were thinking, but there it is.

In the trunk, I found three hole-sawed holes. I think they might have been thinking about mounting the fuel pump in a 75/76 blister, but they never finished the work (and also picked the wrong location).

[BillC]

Time to do more work on the fuel system.

First, need to fit a new vinyl overflow tube to the gas tank (the old one was broken off too short). This was kind of a pain, since the tube has to stretch quite a bit to fit over the nipple. But, here's the result:


Next, is to mount the fuel pump and fuel filter. I'm mounting them up front, and need to make sure everything will fit and clear. I'm using a Tangerine Racing fuel pump mount. I decided to also make a mount for the metal fuel filter. Here's how I did it.

First, start with a strip of aluminum, 1" wide by 2.5" long and fold a "Z" bend in the middle:


Then, shape one end over a socket:


Here's the finished bracket:


And, all the brackets mounted:


I'll install fuel lines and run wires tomorrow.

[barefoot]

Next, is to mount the fuel pump and fuel filter. I'm mounting them up front, and need to make sure everything will fit and clear. I'm using a Tangerine Racing fuel pump mount. I decided to also make a mount for the metal fuel filter. Here's how I did it.

And, all the brackets mounted


[/quote]

I hope you won't have to remove the fuel tank next time a new filter is needed ??
Mine are just behind the opening in the front firewall where there's access (late years fuel pump mounting area)