Vinyl Wrapping a 914 with GT Flares, Deck lids and doors finished. Options

[poorsche914]

Been planning on wrapping my 914 with printed vinyl for several months. Had a mockup of the design finished this past winter. Finally built the full-size graphics and began printing the vinyl today. I have experience wrapping flat surfaces such as walls and enclosed trailers so the doors and deck lids on the 914 should be a breeze.

However... the flares are going to be a challenge. I have decided to do a color layer first and then add the graphic elements separately (the doors and deck lids have base layer and graphics printed as one).

Any tips on how to best apply the wrap to the flares without ending up with a wrinkly mess would be greatly appreciated.

steve
(IMG:style_emoticons/default/driving.gif)

[PanelBilly]

Before all this covid shit I was working on a tech session for this year’s Turnout that would allow a hands on wrap class. 3M has a tech advisor in our area who could be the instructor and at least give everyone a chance to see if they had the desire to peruse wrapping their own car. When this is all over I’m putting it back on my list