SpeedHut gauge panel, possible limited run - Any interest? Options

[tygaboy]

EDIT on 6/6/2021
I made 6 SpeedHut gauge panels today. See my post on page 4 of this thread for a "fresh off the plasma table" pic.

If you're still interested, I should have these ready to go in a week or so.

- these are .063 3003 aluminum
- they will not be painted
- they do not have the raised stamping for the dimmer
- they are set up for a 4.5" center gauge, 4" outer gauges
- 3 have holes for the dimmer, 3 don't

$35 plus shipping from 94952.

Yes, I'd said $20 earlier but that was a year ago and I was being too generous with my time and consumables. Just be thankful I'm not making them out of wood. (IMG:style_emoticons/default/laugh.gif)

Let me know if you're interested. I'll probably make more once I get more material.
Thanks again for your patience.
Chris


EDIT on 6/24/20:
To the interested parties who've already contacted me or posted here to date:

The plasma table is back in action so now I'm tuning the design. See my post from today (6/24) for the latest updates re: what's new and what I still have to do.
_______________

As to price, it'll be the same thing I try and pull off whenever I do stuff for friends:
Cost of materials and consumables and you buy me a coffee if we ever meet.

I'm thinking $20 plus shipping.

Thanks for your patience.

Chris
_____________

For those using or contemplating SpeedHut gauges, you'll find they are just a bit undersized compared to the stock gauges and require some sort of wrapping or spacer in order to fit well in the stock panel.

I opted to give a go to working up a replacement panel and as I was making it, I thought, while I'm cutting one, I could cut a few more, if there was interest.

This is V1 and it needs a couple minor tweaks, but you get the idea.

Note that it has a 90 degree fold along the bottom edge that I'll stretch so the panel curves a bit, like the factory part.

This one is .060 aluminum but I could do steel, too.

Would anyone be interested in one?

PM me, thanks,
Chris

[914-300Hemi]

I would like one in black.