123 Distributor / Setting timing Options

[rjames]

For those that have a 123 Distributor, I need some help setting my timing. I'm probably over thinking all of this but I've read several different threads on setting the timing with this distributor and I have interpreted them all differently.

I'm running a stock 2.0 w/ DJet.
The 123 distributor setting I'm using is 'B' (negative advance), and has a max advance of 22 @ 2700 RPM.

With my new-school timing light that allows me to set the advance, (with vacuum line from the tb plugged) do I:

- Set timing light to 27 advance and rev to 3500 RPM and time to the TDC mark?
- Set timing light to 0 advance and rev to 3500 RPM and time to 27 degree mark (same as above, right?)
- Set timing light to 22 advance and rev to 2700 RPM and time to TDC mark?
- Something else? (IMG:style_emoticons/default/rolleyes.gif)

I feel like an idiot asking this question. Timing is such a basic thing and I had no problem with the stock distributor and an old school timing light, but I've read more than one thread on how to time with the 123 distributor, plus I've also read that there's 10 degrees advance added at static on these distributors.
Help!

[rjames]

I have the vacuum port on the dizzy connected to the manifold vacuum port on the TB which is used to retard timing at idle. Using setting ‘b’ which is the correct setting for the stock dizzy the 123 dizzy replaced. Setting ‘b’ does not use vacuum advance.
Stock djet with correct parts. Smog stuff has been removed. Idle was 900 with the stock distributor.

I am hoping that someone can explain why when the max advance on the 123 dist is 22 degrees I still time to the 27 mark.