 Oil Catch Can? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| RolinkHaus |
 Nov 23 2020, 04:43 AM
Post
#1
|
|
Member  Group: Members Posts: 253 Joined: 21-July 18 From: Noblesville, IN Member No.: 22,330 Region Association: None  |
Wondering if a Oil Catch Can is worth it?
How does it effect the cooling properties? Good possibility I will track the car in the future. |
   |
 
|
  |
Replies
| ChrisFoley |
Dec 8 2020, 09:41 AM
Post
#2
|
|
I am Tangerine Racing Group: Members Posts: 7,964 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None 
|
No need to drill holes thru the sides of the tower to attach a flat cover.
   |
|
|
|
| GregAmy |
Dec 8 2020, 11:02 AM
Post
#3
|
|
Advanced Member Group: Members Posts: 2,397 Joined: 22-February 13 From: Middletown CT Member No.: 15,565 Region Association: North East States
|
QUOTE(ChrisFoley @ Dec 8 2020, 10:41 AM)  No need to drill holes thru the sides of the tower to attach a flat cover. Did you just jam that in down at the bottom? Gotta be careful not to tighten too hard, lest it pull up the aluminum block... Do you sell this? I'll convert the race car to that, it'll make the line routing a lot easier. |
|
|
|
| ChrisFoley |
Dec 8 2020, 12:23 PM
Post
#4
|
|
I am Tangerine Racing Group: Members Posts: 7,964 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None
|
QUOTE(GregAmy @ Dec 8 2020, 01:02 PM) QUOTE(ChrisFoley @ Dec 8 2020, 10:41 AM) No need to drill holes thru the sides of the tower to attach a flat cover. Did you just jam that in down at the bottom? Gotta be careful not to tighten too hard, lest it pull up the aluminum block... Do you sell this? I'll convert the race car to that, it'll make the line routing a lot easier. When the aluminum block is rotated into position, the stud is then screwed thru to make contact with the shelf below and lock the block against the overhangs front and rear. Its part of my horizontal cooling system. I never considered selling it separately. The large sleeve is designed to accommodate the filler tower. |
|
|
|
| GregAmy |
Dec 8 2020, 01:03 PM
Post
#5
|
|
Advanced Member Group: Members Posts: 2,397 Joined: 22-February 13 From: Middletown CT Member No.: 15,565 Region Association: North East States
|
QUOTE(ChrisFoley @ Dec 8 2020, 01:23 PM) When the aluminum block is rotated into position, the stud is then screwed thru to make contact with the shelf below and lock the block against the overhangs front and rear. Ah hah! ok, I see that now. I'll chat with you about getting one, but the top plate can be blank for me to tap/fit as needed. |
|
|
|
Posts in this topic
RolinkHaus Oil Catch Can? Nov 23 2020, 04:43 AM
RolinkHaus Found some info.
http://www.914world.com/bbs2/inde... Nov 23 2020, 05:04 AM GregAmy Catch cans are required by most racing orgs to kee... Nov 23 2020, 07:51 AM brant If you put the car onto a track
You need an oil p... Nov 23 2020, 08:02 AM RolinkHaus If you were buying a tuna can which one would you ... Nov 23 2020, 10:39 AM brant I haven't really looked very closely at what i... Nov 23 2020, 11:13 AM
ChrisFoley
I have not looked to see if CFR sells one
I h... Nov 23 2020, 02:32 PM GregAmy If you're putting anything 200TW or stickier o... Nov 23 2020, 11:52 AM Charles Freeborn
If you're putting anything 200TW or stickier ... Nov 25 2020, 04:42 AM brant
[quote name='GregAmy' post='2868767' date='Nov 23... Nov 25 2020, 09:37 AM ThePaintedMan
I ran an accusump on a type 4 for around 10 yea... Nov 25 2020, 11:43 AM Charles Freeborn
[quote name='GregAmy' post='2868767' date='Nov 2... Nov 25 2020, 06:05 PM RolinkHaus Chris Foley ....Pm'd you Nov 23 2020, 06:40 PM RolinkHaus Looking for this catch can. Pic posted by Kargeek... Nov 29 2020, 06:02 PM 914werke I haven't really looked very closely at what ... Nov 29 2020, 08:08 PM RolinkHaus
I haven't really looked very closely at what... Nov 30 2020, 04:43 AM 914werke Do you have a pic?
Of which the Old Welt. versio... Nov 30 2020, 10:47 AM RolinkHaus Yeah, already have one of these. Looking for a oi... Nov 30 2020, 07:27 PM GregAmy I'd love to find a catch can that completely r... Dec 2 2020, 05:29 PM Jetsetsurfshop :driving: Dec 2 2020, 08:38 PM Jetsetsurfshop This is Rev's VW Bug. Jake built the engine fo... Dec 2 2020, 08:40 PM GregAmy So they inserted a bracket/bar across the void and... Dec 2 2020, 09:32 PM RolinkHaus Being that I have a late 1975 does it require a PC... Dec 3 2020, 05:36 AM RolinkHaus In order for the oil catch can (oil breather) to w... Dec 6 2020, 06:59 AM GregAmy The air filter provides no significant vacuum to t... Dec 6 2020, 08:39 AM RolinkHaus Thank you!! Dec 6 2020, 08:42 AM GregAmy Quick correction: I got to re-thinking and just lo... Dec 6 2020, 10:00 AM RolinkHaus Mine has a K&N. Dec 6 2020, 11:51 AM brant A breather box should not be mounted low
Also th... Dec 6 2020, 12:20 PM Charles Freeborn Here is mine. Mounts to the cross bar on engine si... Dec 7 2020, 09:05 PM stownsen914
Here is mine.
Looks like an electric fan setup.... Dec 9 2020, 07:18 AM Charles Freeborn
Here is mine.
Looks like an electric fan setup... Dec 9 2020, 10:02 AM Jetsetsurfshop
No need to drill holes thru the sides of the towe... Dec 9 2020, 01:04 PM Charles Freeborn Chris' flat fan set up is a thing of beauty. T... Dec 10 2020, 09:45 PM |
6 User(s) are reading this topic (6 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 22nd November 2024 - 11:29 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.