Fender Well Liners |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Fender Well Liners |
StratPlayer |
Aug 17 2004, 02:01 PM
Post
#1
|
StratPlayer Group: Members Posts: 3,293 Joined: 27-December 02 From: SLC, Utah Member No.: 27 Region Association: Rocky Mountains |
If anyone here that may be able to reproduce these baby's it would be a bonus for all the 914 owners. If so, let me know and I will trace these out and send you the tracings of the liners. The pictures are of the rear well liners. Let me know so I can trace these out and get them off before I install these. I'm only going to put liners in the rear wells since I have oil lines in the pass. side front I won't be installing the front liners on my car. The rear liners are going in. The are made of a flexable plastic with clips on each for install. They bolt on to the car where the rear valance meets the wheel well and other side connects where the rocker panel meets the well. Very simple install process, the clips that hold them are pop riveted on to the liners.
Attached image(s) |
Eric_Shea |
Dec 30 2004, 01:21 PM
Post
#2
|
||||||
PMB Performance Group: Admin Posts: 19,289 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains |
Nick. Please stop. I've got nothing against you personally. We've e-mailed off the list when I was looking for a -6 tank. You weren't ready to sell. I've never held anything personally against you. I watched your flywheel deal and your tub deal and I basically stayed out and said nothing (I asked if you could post a pic because I knew someone who was looking... was I interested? No but you never know who I could have sent your way...) I simply told you to stop being a dick. I'm sure that is to be considered a "personal attack". It was aimed at all your "you guys" comments most of which you have since deleted. "You guys are so cheap, pathetic, know it alls that cost me a bunch of $, rub two pennies together, if a couple of $5's mean that much to you". You've deleted a lot of these things making it look like everyone is picking on you. Really Nick... no tone intended here; don't you understand the effect it has on people when you lump them all together and call them a bunch of cheap bastards? If not... take a look at the many replies you've received, not just from me. That's when I chimed in. Again, the only thing I did Nick was tell you to stop being a dick. You must have felt the same way otherwise you wouldn't have deleted your condescending posts... (IMG:http://www.914world.com/bbs2/html/emoticons/confused24.gif) If you enjoy posting to the list, you must enjoy the list. If so, hang out and be happy. It's a really cool place with a great group of people. If you don't like the people here and you feel you don't fit in then my advice would be to leave... you'll only make yourself angrier. That's not good for you. Especially if you're recovering from surgery. (IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif) I personally don't want you to leave or butt out of any threads. You seem to have an interest in 914's and that can only be good. You also seem to have an interest in lumping people together and calling everyone on the list a bunch of cheap, penny-pinching jerks that are "not your type". The world is not made up of people that are "just like Nick" or "just like Eric". If you have a personal bitch with me... go for it. If you have a beef with Jim or Mark for attempting to steal your friend Jay's work, say so. Don't lump Lawrence, Sean, Mike or whomever won't agree with you into the "you guys" category. Want some examples from what posts you've left up?
...and that was just from one post. There's 3000 members here Nick. They didn't attack you, I did (along with a handful of others) because you "generalize" (see above) and you piss people off. The "whole board" is way cool to "newbies". I think that's one of the greatest things about this board. You don't have to wade through piles of snob before someone decides your project is "cool enough" for them to talk to you. Check this thread out. You'll even find Greg and I agreeing on things. If Greg decides to weigh in here I'm "fairly" certain that he'll admit that his initial "methods" of promoting his wares is what got him in trouble with a "few" members Nick... a few (out of 3000). By posting your generalized "cheapskate" comments YOU fanned the flames Nick. You told 3000 people that they suck. You're bound to get some response don't ya think? Again, I just told you to stop being a dick. And again, you must have agreed because you deleted your comments. Jim said it kinder than I; and your reply?
Please Nick. Start over. If you honestly wanted to help out, say so. "Hey gang, I wanna help out here. I'm good friends with Jay over at Partswerks and I know that he's sued in the past over these things... approach with caution". Relax and enjoy the list Nick. If you do... I'll "guarantee" you'll get a bunch of comments just like type11969's last one. A simple "thanks". Best wishes on your surgery... (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif) |
||||||