Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Fuel Overheating, Gas tank shrouding
Mowog4
post Jul 8 2021, 08:01 PM
Post #1


Member
**

Group: Members
Posts: 316
Joined: 2-November 15
From: Mesa AZ
Member No.: 19,325
Region Association: None



I have a Subaru WRX turbo conversion with a Renegade Hybrid radiator kit, today I was driving it in Phoenix during a 109 degree day, and it started to sputter and run a bit rough. I opened the front trunk, the fuel tank was so hot i couldn’t touch it. I am guessing the radiator, AC Condenser, and fans are blowing the hot air directly onto the tank. Has anyone done any shrouding to direct the air out of the openings on the side of the trunk.

I know I have seen pictures of this, just can’t find them. Anyone have any pics?
Thanks
Ed
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
76-914
post Jul 8 2021, 09:59 PM
Post #2


Repeat Offender & Resident Subaru Antagonist
**********

Group: Members
Posts: 13,647
Joined: 23-January 09
From: Temecula, CA
Member No.: 9,964
Region Association: Southern California



You mean like this? http://www.914world.com/bbs2/index.php?s=&...t&p=2500558

Before you go this route try reducing your intake area or increasing your exhaust area. Intake area should be 20% smaller than exhaust area. Also be sure the gasket on the tank bulkhead is intact and making contact against the lid. You don't need a large opening to cool a Subaru. I run AC and look at the size of my opening.

Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mowog4
post Jul 8 2021, 10:24 PM
Post #3


Member
**

Group: Members
Posts: 316
Joined: 2-November 15
From: Mesa AZ
Member No.: 19,325
Region Association: None



QUOTE(76-914 @ Jul 8 2021, 08:59 PM) *

You mean like this? http://www.914world.com/bbs2/index.php?s=&...t&p=2500558

Before you go this route try reducing your intake area or increasing your exhaust area. Intake area should be 20% smaller than exhaust area. Also be sure the gasket on the tank bulkhead is intact and making contact against the lid. You don't need a large opening to cool a Subaru. I run AC and look at the size of my opening.

Attached Image

Here is my trunk opening. This is the first time I have driven it with the temps this hot outside. The AC blew cold, maybe add a heat shield and see if that benefits it. Or, just not drive it when it is this hotAttached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 27th December 2024 - 10:31 PM