Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Over my head with my 914, Need help
NJTom
post Jul 20 2021, 02:13 PM
Post #1


Member
**

Group: Members
Posts: 96
Joined: 16-July 14
From: NJ
Member No.: 17,643
Region Association: None



Hello, the forum has been a great asset in the past and I’m hoping it will be again. My mechanic passed away and he rebuilt my 1972 swapping out the 1.8 and putting in a 74 2.0. The last thing he told me before he left this earth was get a new Weber carburetor which I did and I installed, that was pushing my mechanical ability. I don’t race or beat my car it’s strictly a Sunday driver. Here’s my situation, when I start and drive the car ir runs and drives smooth and purrs like a kitten! After about 15 minutes it back fires cuts out and jerks like a bronco! Odd that it can go from one extreme to the other. One other thing the coil gets HOT! Like so hot you can’t touch it. I was wondering if the coil might be bad and that was the cause a lack of voltage??? In that 15 minute window the car idles fine. Any thoughts or suggestions are greatly appreciated. Thanks in advance! Tom
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
RiqueMar
post Jul 20 2021, 02:17 PM
Post #2


Enrique Allen Mar
****

Group: Members
Posts: 2,179
Joined: 28-August 08
From: San Diego, CA
Member No.: 9,478
Region Association: Southern California



NJTom - I'm sorry to hear about your mechanic passing away. While I don't have any input on this specific subject, I'm sure that with the help of the forum as well as some self-determination, you'll get there. Using myself as an example, I was not mechanically inclined when I embarked on my project. However, everything I've learned about cars has been out of a desire to create / build my own.

You can do it!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 28th December 2024 - 12:18 AM