![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
steuspeed |
![]()
Post
#1
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,008 Joined: 12-July 11 From: Portland, Oregon Member No.: 13,308 Region Association: Pacific Northwest ![]() |
I'm replacing all the rubber boots on my FI connectors. I made these tools out of windshield wiper blade metal strips. I got about half the pins out by depressing the stop tab in the slot above the pin. The rest are not budging. I read on a Rennlist board that the the other side of the female pin could be digging in the plastic. I'll try and see if I can verify if the pin slot is smooth all the way through.
Edit: It is smooth all the way through. The plug side is not catching. Any tips? Anyone know where to source replacement connectors? Attached thumbnail(s) ![]() ![]() |
![]() ![]() |
914Mels |
![]()
Post
#2
|
Member ![]() ![]() Group: Members Posts: 357 Joined: 20-June 11 From: Santee Member No.: 13,221 Region Association: Southern California ![]() |
Rock auto has the connectors fairly cheap. I forget how they are listed in the online catalogue. The connectors come apart pretty easy. put the tool you made in from the injector end and push the tab down that sticks up on the back side. There is a small slot in the plastic. If the tool you made is too wide, try a paper clip.
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 25th June 2024 - 07:33 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |