Porsche-Subaru Starting Problem, Should I bypass some stuff? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Porsche-Subaru Starting Problem, Should I bypass some stuff? |
willieg |
Apr 3 2022, 10:39 PM
Post
#1
|
Member Group: Members Posts: 137 Joined: 13-August 18 From: Pleasant Hill Member No.: 22,389 Region Association: Northern California |
I have a 1974 914 with a 2001 Subaru EZ30 engine and 5 speed Subaru transmission. I bought the car with the Subie engine and tranny already installed and drive it every chance I get. Last time I went for coffee, the car would not start when I got back to my car. I turned the key to the “on” position, got all the usual noises such as fuel pump and then turned the key to start the car. Nothing. I tried again and……Nothing. On about the 8th try, the car rumbled to life just like normal.
The car would not start once I got home and the first thing I replaced was the neutral safety switch on the Subie transmission. Again, the usual noises when the ignition is “on” but no start. I then replaced the ignition switch with a new switch. Again, the car functions worked with the key “on” such as fuel pump,lights, etc but still would not start when I turned the key to start the car. I then turned the key to the “on” position, and touched a wire directly from the positive side of the battery to the starter solenoid and the car started. My question for those who have done this conversion is: If I run a wire directly from the ignition switch to the starter solenoid, with appropriate relay and fuse, am I bypassing anything important? I know I am bypassing the neutral safety switch but is there anything else? Or can anyone who has done this conversion point me to other possible points of failure? The car has been off the road for two weeks and I am not getting any younger. |
Chris H. |
Apr 4 2022, 09:42 AM
Post
#2
|
Senior Member Group: Members Posts: 4,043 Joined: 2-January 03 From: Chicago 'burbs Member No.: 73 Region Association: Upper MidWest |
|
nada911 |
Apr 4 2022, 10:35 AM
Post
#3
|
Nada911 Group: Members Posts: 10 Joined: 14-October 13 From: Idaho Member No.: 16,515 Region Association: Pacific Northwest |
Narrow down where you are not getting current. Does the starter solenoid get current when key is turned? That wire needs to be a tight connection as it can come loose with driving. If no current when key is turned, trace back to where the next location of current is which would be your ignition switch unless you have a relay wired in there: Some people use them so less current is being carried through the ignition switch). If so, then if the 30 pole (hot) side of the relay is dead, then go back to the ignition switch. If its hot and the 87 pole is dead it would be the relay or its fuse etc. |
nada911 |
Apr 4 2022, 10:37 AM
Post
#4
|
Nada911 Group: Members Posts: 10 Joined: 14-October 13 From: Idaho Member No.: 16,515 Region Association: Pacific Northwest |
Narrow down where you are not getting current. Does the starter solenoid get current when key is turned? That wire needs to be a tight connection as it can come loose with driving. If no current when key is turned, trace back to where the next location of current is which would be your ignition switch unless you have a relay wired in there: Some people use them so less current is being carried through the ignition switch). If so, then if the 30 pole (hot) side of the relay is dead, then go back to the ignition switch. If its hot and the 87 pole is dead it would be the relay or its fuse etc. Forgot to add that it could also be a flat spot on the starter windings (if old). |
Lo-Fi Version | Time is now: 21st September 2024 - 07:01 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |