Idle Speed and Air Temp/Humidity Options

[StarBear]

As getting ready for the 2022 Northeast Gathering, I'm encountering a semi-recurring idle issue on my 1974 1.8L LJet FI. When outside air is cool and dry, idles just fine at 950-1000 rpm. When outside air is warm and humid, after warmup the idle falls off to barely running. I've just been adjusting the air flow screw (maybe 1.5-2 full turns) to open it. Of course, the reverse happens - if I preadjust the screw it idles near 1800 then settles down to 1100 after the engine gets totally warm (15 mins or so).
I presume (?) there SHOULD be some regulation, perhaps with the ECU or AFM, to monitor air temp and humidity and make adjustments automatically? I didn't have to manually do this adjustment in the past.
The AAR works and tests out fine. Just annoying to have to pull over after running a while and adjust the screw. (IMG:style_emoticons/default/dry.gif)
Your thoughts @Van @Van_B and @Wonkipop ?

[wonkipop]

@StarBear

i looked through the electrical schematics in the factory manual.
additional current flow diagram AFC engine.
you are absolutely right.
only list temp sensor II for 74.
temp sensor I and II are listed for 75.

thats a relief.
74 1.8 = a classic mate. the old keep it simple stupid principle and one less thing to go the way of a toaster.