Flapper Restoration (aka Flap Control Box), Springs and Sealing Rubber Options

[DennisV]

How are folks going about restoring original flapper boxes?

I had intended to bead blast and powder coat ours. Preparing to degrease them today, I see that they have a spring mechanism inside and what I think is a rubber sealing ring. I don't think those would much like the powder coating and required heat. Some other styles talked about on other forums get disassembled, but I don't see a way to get those components out without destroying the housing.

Perhaps bead blast and spray can is the best bet, and just accept the spring and sealing ring will get painted?

Thank you.

P.S. I've seem some discussion suggesting 914-6 were gray rather than black. Was that ever definitively answered? The color of ours is rust. (IMG:style_emoticons/default/sad.gif)

[DennisV]

I got around to glass bead blasting these last night. A couple surprises.

First: I thought under the rust I'd get to at least a chip of original paint. I went from rust to bare metal. Not a trace of paint.

Second: I assume the flapper inside would have a ring of rubber like substance for the seal. Similar to what our 356 had. Instead I found mesh screen. Went easy in the interior areas in the vicinity of that flap. So I don't think I simply blew it away without a trace.


Has anyone had success getting the caps off that are held down by the 4 bent over metal tabs? I would sure like to take them apart for better prep and paint, but it's not worth breaking them.