![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
r_towle |
![]()
Post
#1
|
Custom Member ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 24,598 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States ![]() ![]() |
I have a side shifter that leaks at the console.
I cold drip every hour… I bought the transmission gasket set from pelican There is nothing in the set for the shifter console….nada I removed the console It looks like there is a bushing at the bottom. Does anyone have a clue on part numbers to order to rebuild the shifter console? It’s a 75/76 if that matters. Rich |
![]() ![]() |
Dave_Darling |
![]()
Post
#2
|
914 Idiot ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 14,999 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California ![]() ![]() |
There's just the slightest possibility I was exaggerating.
A touch. But I did find that I had to move the whole side-shift assembly around to odd angles to get it out of the gearbox. And to get it back in again. The rake gets in the way of various things, including the side of the hole you're pulling it out through. --DD |
r_towle |
![]()
Post
#3
|
Custom Member ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 24,598 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States ![]() ![]() |
There's just the slightest possibility I was exaggerating. A touch. But I did find that I had to move the whole side-shift assembly around to odd angles to get it out of the gearbox. And to get it back in again. The rake gets in the way of various things, including the side of the hole you're pulling it out through. --DD Ok yes, Lots of gentle wiggling. The teeth come out one at a time…I think the overall diameter is larger then the hole….so wiggling involved. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 24th June 2024 - 07:18 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |