Engine Compartment Blower Hose, L&R Where to Buy Options

[NARP74]

I borrowed this pic from @skota23 in another topic. Does anyone know where to buy the hoses like this? I have seen and tried others but they have issues and I wanted to try these.

[NARP74]

I'll ask some of my sources to see what they may have.

As I start to measure things the connector on the fan is 55mm and the 914rubber/AA hoses are 64mm or a little over 2 inch and 2.5 inch for the hose others sell.

[wonkipop]

I'll ask some of my sources to see what they may have.

As I start to measure things the connector on the fan is 55mm and the 914rubber/AA hoses are 64mm or a little over 2 inch and 2.5 inch for the hose others sell.

correct.

and 64mm diam hose is too big.
i know that from earlier experiment with mercedes duct.

60mm e. duct will just fit around the original duct.
just.
you have to screw the original duct in slowly bit by bit.
i think i might have lubricated the original duct with a bit of dishwashing liquid which helped me get the new duct on. in my case i literally used the entire original duct.
both halfs that i had i screwed entirely inside the outer sleeve of 60mm e. duct.

you could easily make a long duct out of surgery on an old original short duct by doing much the same thing.