![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
Jake Raby |
![]()
Post
#1
|
Engine Surgeon ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 9,396 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States ![]() |
Someone sent me an email asking about the DTM for the 914, so I figured I'd make a post..
I have the first version of it finished, and ready to be installed on my newly reconfigured, hybrid headed 2316 for my 914. This first version is very plain and utilizes no internal cooler at all. I am starting with this shroud to get some baseline numbers to test against when we start moving locations for the stock cooler to be located. I have 4 different locations for the stock cooler planned, but two of them create some funky routing of the airhose thats just not pretty to look at at all. I do think that one of these will work exceptionally though so I plan on trying it anyway. One thing I have had made up for the DM for this particular application is a venturi ring that will speed the air up into the fan inlet. This should both quiet the fan down as well as increase the air charge into the fan making the shroud do its job even better. The new 2316 should be on the dyno next week if assembly goes well. I am going to do most of this development in my 914 simply because I cannot spare dyno time because of all the other stuff going on right now. I am still shooting for a summer release date for the 914 version, how realistic that is- we'll have to wait and see... I have many more important things going on at the present! You gys are really gonna like this! |
![]() ![]() |
Twystd1 |
![]()
Post
#2
|
You don't want to know... really..... ![]() ![]() ![]() ![]() Group: Members Posts: 2,514 Joined: 12-September 04 From: Newport Beach, California Member No.: 2,743 ![]() |
I DID get the mail from Jake and I have been on the list for at least a couple of months.
I mailed a positive reponse back to Jake at the following mail adress: Mad Scientist [productdevelopment@aircooledtechnology.com] Hre is a copy of Jakes letter to me.... (see below) From: Mad Scientist [mailto:productdevelopment@aircooledtechnology.com] Sent: Wednesday, January 19, 2005 1:43 PM Subject: MassIVe DTM in 914 flavor Importance: High Okay guys.. Things are getting underway with the DTM development now that the test engine is almost finished and my 914 is all upgraded suspension wise. Please reply to this address when you receive this email. Look for more info very soon! I should have a finished product sometime late spring/ early summer! Jake Raby The Mad Scientist So there ya are... If ya want on the list... send this back to him.. I did. And thanks Jake..!!!!! I would send ya the money right now if you would take it..... Regards, Clayton (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/boldblue.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/boldblue.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/boldblue.gif) |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 30th June 2024 - 01:00 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |