Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> 1973 914 1.7
Tewfiks
post Apr 24 2023, 04:29 AM
Post #1


Newbie
*

Group: Members
Posts: 5
Joined: 23-March 22
From: Florida
Member No.: 26,416
Region Association: South East States



My son and I have been struggling to get his 73 914 1.7 back on the road. So far we have gone through the fuel system: cleaning the fuel tank, replacing the fuel pump, new fuel lines. We have had the webers rebuilt. We have replaced the throttle linkage.
The engine will turn over and occasionally start for us, but will not idle smoothly. Recently the car will start and idle rough and then will suddenly shut down and make a sound as if something is binding! Our frustration is rising and would like to ask for any advice that others with more experience with type 4 engines may have.

Thanks in advance.

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
Dave_Darling
post Apr 24 2023, 04:46 AM
Post #2


914 Idiot
***************

Group: Members
Posts: 15,000
Joined: 9-January 03
From: Silicon Valley / Kailua-Kona
Member No.: 121
Region Association: Northern California



Check the basics first.

- Do you have spark? You can grab an extra spark plug and hook it to a plug wire. Tape it so the outer electrode (or the threads) are touching a ground, and watch while someone cranks the starter. Sparks should be visible in the gap. Also double-check that your plug wires are connected correctly. The firing order is 1-4-3-2, which is noted on embossed letters on the engine tin (look for "Zundfolge"), and the cylinder numbers are also embossed on the engine tin near the spark plug holes.

- Do you have fuel? Is fuel getting into the float bowls of the carburetors? Do you see fuel squirting out of the accelerator jets when you open the throttles? Do you smell fuel at the tailpipe after cranking the starter for a while?

- Do you have compression? Does the starter motor crank evenly, or is the sound uneven? An uneven sound may indicate a cylinder with no compression. A compression gauge will tell you for sure, though.

With those three things, the engine should run, if the amount of fuel is somewhere close and the spark timing is somewhere vaguely in the right area.

You can do a "static timing" setup so that the spark is happening right around TDC, which should be enough for the motor to run. As for the fuel amount.... Well, I don't speak carburetor, so I'm out of suggestions for that. Make sure you don't have any vacuum leaks, and then... ??

--DD
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 25th June 2024 - 11:28 PM