Emblems Options

[Mueller]

Machined here in California, 3mm thick by 20mm tall (.120" x .787")

Can be made larger or smaller, with or without chamfers.

Sorry no pins or studs, these are to be adhered using double stick tape (not supplied)

Prices: $10 per letter or number, for example the 3.0 sample will be $20 plus shipping. The 914-GT will fit in a small USPS flat rate box which is currently $7

[Mueller]

Short update for anyone that cares,

The emblems have been a love/loathe project for me for sometime.

My current mill is or was not ideally set up for such a small part. Spindle speed too slow (takes a long time to cut even a small emblem), no flood coolant (required me to stand there and blow chips off part to as not clog things up and break a cutter) plus a few other little things here and there.

Like many others I would cheap out on machinery or tooling and it has been getting me depressed and frustrated for a while. I wouldn't want to go out in the garage to work on my own projects or work on something for someone else.

Finally I had a talk with the wife (and kids) and we've come to the conclusion that I need to invest a little in the home shop. It was a hard sell at 1st with the wife but in the end I think it will be better for me mentally and emotionally and if I can make a few dollars back, financially (IMG:style_emoticons/default/smile.gif)

Basically this is my public apology for anyone interested in an emblem and I have let you down by not getting back to you or delivering (for the record I have never received funds and not delivered a part)