 Adjusting Idle PMO Carbs - Six Cylinder |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mmascari |
 Jun 16 2023, 02:23 PM
Post
#1
|
|
Member  Group: Members Posts: 322 Joined: 1-September 14 From: Concord, CA Member No.: 17,850 Region Association: None  |
Do I turn the idle adjuster clockwise or counter-clockwise to Increase the idle?
|
   |
 
|
  |
Replies
| Steve |
Jun 16 2023, 05:45 PM
Post
#2
|
|
914 Guru Group: Members Posts: 5,698 Joined: 14-June 03 From: Orange County, CA Member No.: 822 Region Association: Southern California 
|
QUOTE(mmascari @ Jun 16 2023, 01:23 PM)  Do I turn the idle adjuster clockwise or counter-clockwise to Increase the idle? Clockwise, but remove the cross bar from one side when making the adjustment. I also used the ball thingy on the throats to make sure they were the same on both sides. Then put the cross bar back on and adjust accordingly if it throws the carbs off. https://www.amazon.com/Latest-Rage-53857308...24882&psc=1 |
|
|
|
| porschetub |
Jun 20 2023, 04:44 PM
Post
#3
|
|
Advanced Member Group: Members Posts: 4,728 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None |
QUOTE(Steve @ Jun 17 2023, 12:45 PM) QUOTE(mmascari @ Jun 16 2023, 01:23 PM) Do I turn the idle adjuster clockwise or counter-clockwise to Increase the idle? Clockwise, but remove the cross bar from one side when making the adjustment. I also used the ball thingy on the throats to make sure they were the same on both sides. Then put the cross bar back on and adjust accordingly if it throws the carbs off. https://www.amazon.com/Latest-Rage-53857308...24882&psc=1 My experience was I found I hadn't exactly set up the drop links after replacing the worn ball cups ,found when hooking up the crossbar again it was clearly obvious they weren't even. Reset them and much improved,rebuilt the all the crossbar throttle linkages as due wear on those ball cups I had lots of slack in the system @ those points. IMO if all this is sorted and your carbs are fresh and you have even vacuum on all throats set up is pretty straight forward. Cheers. |
|
|
|
Posts in this topic
mmascari Adjusting Idle PMO Carbs - Six Cylinder Jun 16 2023, 02:23 PM
porschetub
Do I turn the idle adjuster clockwise or counter-... Jun 16 2023, 04:13 PM brant Wrong thread
Delete Jun 16 2023, 04:14 PM
nditiz1 As Steve said.
Don't buy that one from Moore ... Jun 16 2023, 07:00 PM
Luke M This is PMO EFI but linkage is the same.
https://... Jun 20 2023, 07:18 PM porschetub
This is PMO EFI but linkage is the same.
https:/... Jun 20 2023, 11:36 PM VaccaRabite
[quote name='Luke M' post='3084815' date='Jun 21 ... Jun 21 2023, 08:34 AM porschetub
[quote name='Luke M' post='3084815' date='Jun 21... Jun 21 2023, 02:45 PM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st October 2024 - 08:21 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.