 L-jet with a 2200 or 2258, Has it or can it be done? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| JamesJ |
 Dec 9 2023, 10:51 AM
Post
#1
|
|
Member  Group: Members Posts: 229 Joined: 30-April 20 From: Sunnyvale, CA Member No.: 24,202 Region Association: Northern California 
 |
Hello World,
Has anyone successfully been able to pair(dial in) a modified 914 L-jet system with a 2200 or 2258? I am looking into doing this for my street car and am aware that the AFM will need to be modified. I have a 52mm throttle body with a modified throttle actuator so the operating arm will work with the L-jet and will fit the stock plenum seal. Will I need bigger fuel injectors than my new 2.0 injectors? If so, which ones? What else do I need? I did a Google search using key words, but was not able to find any previous threads on this topic. Any advice or thoughts would be appreciated. |
   |
 
|
  |
Replies
| Root_Werks |
Dec 9 2023, 11:15 AM
Post
#2
|
|
Village Idiot Group: Members Posts: 8,510 Joined: 25-May 04 From: About 5NM from Canada Member No.: 2,105 Region Association: Pacific Northwest
|
I did a 2.0 L-Jet that worked very well. Would think a 2.2 would also work as long as you used a correct combo of parts. There should be a lot of resources on the Samba, Bus folks.
|
|
|
|
Posts in this topic
JamesJ L-jet with a 2200 or 2258 Dec 9 2023, 10:51 AM
Dave_Darling You might check to see what other ~2.2 liter 4-cyl... Dec 9 2023, 12:57 PM Superhawk996 In this day and age - Microsquirt. Not the answe... Dec 9 2023, 01:07 PM Geezer914 Enlarge the plenum opening for the throttle body u... Dec 9 2023, 01:24 PM
porschetub
Enlarge the plenum opening for the throttle body ... Dec 9 2023, 09:40 PM Montreal914 Also a lot of engine/FI info on shoptalkforum.com
... Dec 9 2023, 01:31 PM 914werke Probably the displacement will have less impact th... Dec 9 2023, 03:44 PM porschetub
Hello World,
Has anyone successfully been able to... Dec 9 2023, 04:18 PM Geezer914 I am running a 50 mm Vanagon throttle body on my 2... Dec 10 2023, 06:20 AM porschetub
I am running a 50 mm Vanagon throttle body on my ... Dec 11 2023, 01:55 PM Geezer914
I am running a 50 mm Vanagon throttle body on my... Dec 12 2023, 10:28 AM VaccaRabite IMO - why bother?!
L-jet is archaic. It uses... Dec 11 2023, 11:52 AM VaccaRabite The biggest throttle body you can easily run is th... Dec 11 2023, 03:52 PM JamesJ Thank you all for your replies...keep them coming,... Dec 12 2023, 12:01 AM JmuRiz You need something like this...
https://youtu.be/K... Dec 12 2023, 08:34 AM 914_teener What's your budget?
You'll start running ... Dec 12 2023, 12:03 PM VaccaRabite
What's your budget?
You'll start running... Dec 12 2023, 01:48 PM |
8 User(s) are reading this topic (8 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 04:43 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.