 New! PMB Front Pad Hardware Kits for Porsche 911 and 914-6, Exact Reproductions |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Eric_Shea |
 Mar 11 2024, 11:11 AM
Post
#1
|
|
PMB Performance  Group: Admin Posts: 19,289 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains   |
New PMB Performance DirectFit Pad Hardware Kits!
914-6 Guys... We didn't forget about you! We made them all gang. From 356C and SC to esoteric 914-6/GT and SWB Wide L-Rear sets. We'll have all the springs, pins and clips to get you back up and running at a price you'll love. No more hunting around for crusty parts and riveting old springs back together. This is a front set for your classic 911 (These are the kits for the rare 67-68 911S and 911L models with vented rotors!) or 914-6 with vented rotors and M-Calipers (1967-76 with 3" mounting ears and vented rotors). 1976 Saw the last of the M-Calipers as they phased them out on the 912E and other models. If you have a vented rotor 76 car, you may have A-Calipers with the 3.5" mounting ear spacing. BTDT Tip: Check the center-to-center measurement on your caliper mounting bolts if you have a later model car. These would be for the 3" C2C M-Caliper. ALSO... "many" early 911's and 914's have been modified. If you're unsure about which caliper is on your car, get with our helpful phone staff to help make a solid ID. Get Them Here!  |
   |
 
|
Posts in this topic
  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 22nd November 2024 - 07:01 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.