A bit of a wiggle job is an understatement Brake Switch at pedal, Trying to get to the brake switch at the pedal Options

[thecleanoutking]

I was trying to get to the brake switch at the pedal to rule out any issues there..

Oh boy!! posted another thread yesterday (someone said it was a bit of a wiggle job) I'd say.. just to get to the two allens that hold the kick board i had to basically remove the carpet, half my console and after all that I still can't get the kick board out..

The carpet had holes for the clutch pedal, brake pedal, accelerator pedal and even a separate hole for the rod behind the gas pedal (which I ended up just putting a slice into that small hole or I might still be there)..

Now still can't get the kick board out but I lifted it and after removing a small mouse nest i can barley see what I think is the switch...man.. Should have started with the switch at the master?? why two switches any advice on the kick board and pedal switch?

[bkrantz]

The kick board is a monkey puzzle. What works for me is to first remove the pedal rubber covers, second push the clutch pedal about halfway down and wiggle the board up and off that, and finally twist the board to clear the brake pedal. Oh, and pop the access pedal off the push rod so it folds rearward and out of the way.