Terrible front wobble. Bearing/ spindle spacer question. Options

[roundtwo]

Front bearing / spacer help - so close to on the road

914 six almost ready to go after getting it tuned on a dyno today. More about that later.
- trying to chase down the source of the shaking front end.
- Vetted out wheels, tires, tie rods, shocks, bushings, rotor warpage, etc…. All good
-Please see pics.

It seems as if there’s a mismatch between the inner bearing and the spacer. Somethings not right but I don’t know what it is.

The last true leftover problem from the previous owner.

24 mm carrera rotors, Porsche Brenbo brakes, 911 hubs,
new bearings and seals.

Any clue at to what’s wrong?

[technicalninja]

My first Z pulled violently to the left.
Had a bent strut and some other things I fixed. Full on alignment by a wizard...
Still pulled left HARD, Dangerous!

Corky Bell, who I worked for at the time, said put his car up in the air, steal his wheels and tires and try them on my car.

Fixed it right up!

Could not see anything wrong with my tires!

I second Superhawk's suggestion.

You're measuring the wrong spots...